1 / 9
Festool Track Mount for Domino XL and 500 — zdjęcie 1
1 / 9

Festool Track Mount for Domino XL and 500

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,19 € – 2,68 € netto (bez VAT)

Dla pliku: Domino Bracket for Track No Key v2_0.4n_0.2mm_PLA_MK4IS_1h50m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,43 € netto (środek widełek).

Masa podana przez autora
43 g
Czas druku podany przez autora
1,83 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This model attaches to the base of your Domino so you can run it along your Festool track for straight lines.

Ocena
5 / 5
Polubienia
105
Pobrania
570
Wydruki
3
Wyświetlenia
2147
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Print this with with the base flat to the print bed. You need supports just for the 2 ledges that insert into the track. I just painted them on and they come right off after the print is done. You attach the mount to the base of the Domino and it inserts into the track flush with the edge. This makes it super easy to line up your marks. 

 

Hardware needed:

2      M5x16 Bolts

2     M5 Knurled knobs https://www.printables.com/model/441885-knurled-m3-m8-thumbscrews-no-support/files

Tagi