Kodama Trinus E3D Mirrored Aero Titan Upgrade

Upgrade you Trinus with E3D's Mirrored Titan Aero!

Use the complete range of E3D Heater Blocks & Nozzles | http://e3d-online.com/

Print with your favourite thermoplastic | http://e3d-online.com/All-Filament

You'll need to replace the electronics as the firmware for the harware is not available. I fitted a Rumba with matching LCD.

This has been designed around theMirrored Titan Aero.

Part Requirements..

1 x E3D 12v Mirrored Titan Aero.
4 x TMC2100 Stepper Drivers.
1 x DC Jack (if you want to use the original unmodified PSU).
1 x Rumba Controller Board.
1 x 12864 Smart LCD Controller.
1 x 40x40x20 12V DC Blower Fan.
Heat-Shrink.
DuPont Connectors.
2.5mm Cable Ties.

You will also need miscellaneous Screws, Nuts, Cables and Skills.

Love 3D printing? Love T-Shirts?

Then you need to check out steps-per-mm.xyz!

It is loaded with a huge range of wearable Parts & Components.

Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)

eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk

Print instructions

Category: 3D Printer Extruders Print Settings

Printer: E3D's BigBox

Rafts: No

Supports: No

Resolution: 0.25mm

Infill: 15%