Kodama Trinus E3D Mirrored Aero Titan Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade you Trinus with E3D's Mirrored Titan Aero!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 948
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Upgrade you Trinus with E3D's Mirrored Titan Aero!
Use the complete range of E3D Heater Blocks & Nozzles | http://e3d-online.com/
Print with your favourite thermoplastic | http://e3d-online.com/All-Filament
You'll need to replace the electronics as the firmware for the harware is not available. I fitted a Rumba with matching LCD.
This has been designed around theMirrored Titan Aero.
Part Requirements..
1 x E3D 12v Mirrored Titan Aero.
4 x TMC2100 Stepper Drivers.
1 x DC Jack (if you want to use the original unmodified PSU).
1 x Rumba Controller Board.
1 x 12864 Smart LCD Controller.
1 x 40x40x20 12V DC Blower Fan.
Heat-Shrink.
DuPont Connectors.
2.5mm Cable Ties.
You will also need miscellaneous Screws, Nuts, Cables and Skills.
Love 3D printing? Love T-Shirts?
Then you need to check out steps-per-mm.xyz!
It is loaded with a huge range of wearable Parts & Components.
Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)
eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk
Print instructions
Category: 3D Printer Extruders Print Settings
Printer: E3D's BigBox
Rafts: No
Supports: No
Resolution: 0.25mm
Infill: 15%