.410/50, Single Latch Modular Ammo Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The shotgun shell box is assembled from separate parts that are printed in orientations chosen to maximize strength.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options.
Other ammo boxes of this type can be found in my Single Flex Latch Ammo Boxes Collection https://www.printables.com/@brass_ring/collections/1320960 .
This is a caliber specific, snap together cartridge box. The cartridge box is assembled from separate parts that are printed in orientations chosen to maximize strength and then snapped together. This is a sturdier version of https://www.thingiverse.com/thing:5270385 or https://www.printables.com/model/187176-modular-ammo-box that is intended to better handle larger and heavier cartridges in high counts.
Assembly Instructions: See the attached PDFs
Print Settings
Resolution Box:
0.2mm
Resolution Latch and Hinge Parts:
0.12mm
Supports:
Yes
Infill:
10% Gyroid
Notes:
Supports are only required under the horizontal overhangs.
Do not use Perimeter Generator: Arachne on the box bottoms.
The Flex Latch and hinge parts are best printed in a flexible material - like PETG. Sometimes PLA will work, but I'm finding problems with brittleness with some PLA filaments.
Category: Tool Holders & Boxes