P
Printablesmweisshaupt
NZXT Phantom 410 power button
This is a replacement power button for the NZXT Phantom 410 case.
- Pobrania
- 185
- Polubienia
- 1
- Ocena
- 0
Wyniki wyszukiwania: 410
Liczymy pasujące modele…
P
PrintablesJammyJellyfish
NZXT Phantom 410 replacement buttons
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTom van Veen
Sony TA-AX410 input select button
The sony amplifier I was working on was missing a button so I modeled a new one to be 3d printed. Printed on its side and in PLA. V2 has slightly larger dimension as I found my first attempt be a little small. Should be closer to the…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 5
P
Printables
YK4106 Pro/Absima Wolf/FMS FCX10 thumb steer/FlySky MG11
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
P
Printables
Sonicare 4100 Travel Case
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
P
Printables
3/4" Garden Hose Thread to 28-410 GPI Bottle Cap Adapter
Designed for use with my Ryobi Compact Battery Powered Chemical Sprayer. This allows the use of "standard" bottles. The intake tube can simply be extended with 5/16 in. I.D. x 7/16 in. O.D. Clear Vinyl Tubing No supports
P
Printables
Radar Presence Sensor with IR Proxy ( LD2410 (C)) and Tilt Mount
This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…
P
Printables
45LC/.410 shotshell sidesaddle mount
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
P
Printables
Skeet Sub-Gauge Knockout Tool for 410ga / 28ga / 20ga tubes
This is a recreation I did in CAD for a standard skeet 12ga shotgun sub-gauge tube knockout tool. Barrel inserts are full length tubes that convert a 12ga shotgun into either a 20ga, 28ga, or 410ga shotgun for the purposes of competition…
P
Printables
Tekno MT410 Bumper
Print this in TPU with supports under, in the orientation in the file. You can adjust the number of perimeters and infill amount to adjust stiffness, but I used the slicer defaults.
P
Printables
Sidchrome Replacement Toolbox Inserts - 12110, 12130, 13110, 14105, 19105, 390-6, 403-6, 407-9, 429-8, 565-0
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
P
Printables
Dell T410 Drive Tray Front Bezel No Supports Better M3 Bridges
Added some bridges over the m3 nut holes to make it easier to print standing upright. Designed for .2mm layer height.
P
Printables
YK41012/Absima CR4.4eco updates
This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…
P
Printables
iDPRT SP410/SP410BT top mount 4x6 label roll holder (UPS and Fedex) (w/ flat option)
Stand/holder for the large 4x6 label rolls with 3" ID core you can request from UPS/Fedex for free. Designed to mount on top of iDPRT SP410/SP410BT but also included a flat base version. You need to print two of the rollers, one for each…
P
Printables
Tekno SCT410 2.0 Rear Mud Flaps Dirty Version
Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
P
Printables
Tekno SCT410 2.0 Hobby Wing Switch mount
Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!
P
Printables
Tekno SCT410 2.0 Rear Mud Flaps Clean Version
THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only
P
Printables
Polypool 410 Goes Smart: Shelly 1PM Mini Gen3 Plug Extension (Wi-Fi + Power Meter)
Ever wished your “regular” plug could magically become a smart plug… without a chunky external box? 😊 This project does exactly that: I took a very common Italian DIY-store plug ( Polypool 410 ) and redesigned the entire outer shell to…
P
Printables
Sony Light, Guide for TA-AX410
I made this after the original plastic part in my Sony amplifier disintegrated. The plastic becomes brittle with age and eventually breaks making input select not work. Printed in PLA. Normal supports. V2 has the support for the buttons…
P
Printables
Sony TA-AX410 input select button
The sony amplifier I was working on was missing a button so I modeled a new one to be 3d printed. Printed on its side and in PLA. V2 has slightly larger dimension as I found my first attempt be a little small. Should be closer to the…
P
Printables
Bosch Front Cord Wrap for Miter Saw 4412, 5412L, 4410L
( USE ABS!!!! ) for Bosch 2610915694 Front Cord Wrap for Miter Saw 4412, 5412L, 4410L this is longer than the normal part.
P
Printables
TPU Push-On Tire for Janod Baby Walker (J04410)
This is a push-on replacement tire designed for the Janod Multi-Activity Sweet Cocoon Baby Walker (J04410) . Print it in TPU and simply press it onto the existing plastic wheel — no glue, no tools, no wheel disassembly required . The tire…
P
Printables
Dolphin Cruiser Set (41015-1)
This is the Dolphin Cruiser set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but…
P
Printables
Getac S410
Vytvořil jsem madlo pro notebook Getac S410 jako náhradu za poškozené. Není to přesná kopie, ale je plně funkční. Tištěno z TPU s podpěrami. Tryska 0,4mm, vrstva 0,2, 3 perimetry, výplň 30%
P
Printables
Left Axle Cap for a Shimano TC500 / TC410 Hub
This axle cap is modeled off the right side axle cap, with clearance for the centerlock rotor mount. The fit is snug to the bearings, and shouldn't have any drag on the rotor mount. Printed in PETG, 0.2mm Layer Height w/ 6 perimeters.…
P
Printables
Janod Baby Walker Click Wheel Cap (J04410)
Description This is a replacement click wheel cap for the Janod Baby Walker (J04410) . The original part contains a small internal pin that creates the clicking sound when the wheel/knob is turned . In my case, this pin had broken off, so…
P
Printables
Idler Wheel /Encoder Knob Replacement for Fusion F410
We have a Fusion F410 at work and have had several issues with it over the last two years, particularly with the 3d printed parts. We recently had a rash of feed errors only to find the plastic wheel was grinding against the encoder base…
P
Printables
MAX4410 amplifier boards enclosures
Small enclosure boxes for MAX4410 headphone amplifier boards, which you can get for cheap from Aliexpress. The lid is designed to be snap fit and can be closed relatively easy, but for opening it you may need to help yourself with…
P
Printables
GIGABYTE H410M HD3P IO Panel
This file is the rear I/O panel model file for the GIGABYTE H410M HD3P model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set the…
P
Printables
24/410 Dispensing Cap
I'm a big fan of Squirt drip wax. Unfortunately, I cracked the auxiliary cap on the bottle, so I have been resorting to keeping it sealed with some painter's tape. I was pretty surprised that I couldn't find a 24/410 dispensing bottle cap…
P
Printables
ESPHome Sensor - D1 Mini ESP8266 USBC and LD2410 case
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
P
Printables
NZXT Phantom 410 replacement buttons
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
P
Printables
D1mini LD2410 Home Assistant case
To print the cover with the logo in two colors change the filament to a different color at layer 4 and 6.
P
Printables
Carten T410 Rally steering cover
Carten T410 Rally steering cover, stops dirt and grass getting on the space by the steering
P
Printables
ESP32 S2 mini - LD2410 - 24Ghz mmWave Radar Sensor - esphome
See description in the main model https://www.printables.com/model/1020388-esp32-d1-mini-ld2420-24ghz-mmwave-radar-sensor-esp Difference : ESP32 S2 mini used and the radar LD2410
P
Printables
.410 2", Single Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Flex Latch…
P
Printables
.410 2 1/2", Single Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Flex Latch…
P
Printables
.410 3", Single Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Flex Latch…
P
Printables
.410/50, Single Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Flex Latch…
P
Printables
.410/63.5, Single Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Flex Latch…
P
Printables
.410/76, Single Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Flex Latch…
P
Printables
.410 2", Double Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
P
Printables
.410 2 1/2", Double Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
P
Printables
.410 3", Double Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
P
Printables
.410/50, Double Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
P
Printables
.410/63.5, Double Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
P
Printables
.410/76, Double Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
P
Printables
.410 2", Double Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410 2 1/2", Double Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410 3", Double Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410/50, Double Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410/63.5, Double Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410/76, Double Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410 2", Double Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
P
Printables
.410 2 1/2", Double Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
P
Printables
.410 3", Double Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
P
Printables
.410/50, Double Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
P
Printables
.410/63.5, Double Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
P
Printables
.410/76, Double Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
P
Printables
Compact Radar Presence Sensor - LD2410C And D1 Mini Esp32 Wall Case (EspHome)
A wall mount radar presence sensor with a LD2410C that gets directly attached to the Wemos D1 Mini Esp32. EspHome and Home Assistant recommended. Fitting yaml is provided as txt (restriction from printables). BOM: D1 mini ESP32 with…
P
Printables
.410 2", Snap Latch Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410 2 1/2", Snap Latch Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410 3", Snap Latch Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410/50, Snap Latch Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410/63.5, Snap Latch Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
.410/76, Snap Latch, Split Hinge Modular Ammo Box
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
P
Printables
Massringe fuer Hundehalsband 410 bis 500mm
Massringe fuer Hundehalsband Anwendung: Dieses Projekt ist eine Kette von Massringen zum Anfertigen von Hundehalsbaendern. Die Ringe sind stapelbar. Jeder Ring hat ein Faehnchen fuer Beschriftungen. Diese Masskette beinhaltet Ringe des…
P
Printables
.410 2", Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
P
Printables
.410 2 1/2", Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
P
Printables
.410 3", Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
P
Printables
.410/50, Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
P
Printables
.410/63.5, Spring Latch, Split Hinge Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
P
Printables
.410/76, Spring Latch, Split Hinge Modular Ammo Box
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
.410 2", Pocket Spring Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Pocket Spring Latch…
P
Printables
.410 2 1/2", Pocket Spring Latch Modular Ammo Box
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Pocket Spring Latch…
P
Printables
.410 3", Pocket Spring Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
P
Printables
.410/50, Pocket Spring Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
P
Printables
.410/63.5, Pocket Spring Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
P
Printables
.410/76, Pocket Spring Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
P
Printables
.410 2", Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
.410 2 1/2", Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
.410 3", Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
.410/50, Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
.410/63.5, Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
.410/76, Pocket Snap Latch Modular Ammo Box
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
P
Printables
Passat B5 Headlight fixature wedge 3B0941042
Wedge for fixature and lower the vibrations on VW Passat B5 headlights. Rebuild for VW's 3B0941042 which isn't produced anymore
P
Printables
ISO 7000-2410 protection
EN: To indicate that the clothing or material provides protection. DE: Hinweis darauf, dass die Kleidung oder das Material Schutz bietet.
P
Printables
Zyliss Typ 410 Nr.100 Gear repair
Repair of a food processor. A gear wheel is broken on the inside. For the repair, the defective gear was traced in the CAD program and then printed with a Prusa SL1S made of tough resin. Zyliss Typ 410 Nr.100 MOD. 3250 Lyss DER…
P
Printables
Shotgun Cartridge Holder (410) (28) (20)
Shotgun Cartridge Holder, that can carry 410, 28, 20 gauge cartridges. Clips onto belt, pocket, trousers, etc. Capacity of 4 cartridges. Use supports for printing. 100% infill (I know that sounds weird but otherwise the clip will snap.) I…
P
Printables
ESPHome Sensor - ESP32-C3 super mini and LD2410 case
This case is based off of Digital Juice's. This update fits the LD2410 and ESP32 C3 super mini from Aliexpress.
P
Printables
YK4106 Pro/Absima Wolf/FMS FCX10 thumb steer/FlySky MG11
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
P
Printables
YK4106 - front wheel weights bracket
YK4106 has a strong rear weight biais in Pro version. This aims at using the room asside the front servo to glue some wheel weights. An update is planed once I'll receive the official optional front weight. Category: R/C Vehicles
P
Printables
Yikong YK4106/Absima Wolf lighter spare wheel
Designed to take place of a 115mm spare wheel. The YK4106 Pro has a huge rear weight bias, not ideal. This lighter spare wheel will allow to gain around 50gr over the real spare tire ... not much, but every little things adds up. May fit…
P
Printables
Absina Sherpa/YK410x body knob
I've lost the body knob of my Absima Sherpa (rebadged Yikong 4102). As the magnets are not strong enough to keep the body in place, I made a new one. Use M4x16 and a nut for Sherpa/YK4102 Use M4x20 and a nut for YK4106 Category: R/C…
P
Printables
Lego Compatible (92410.dat) Container Cupboard 2 x 3 x 2 with Hollow Studs
This model is compatible with the lego system.