1 / 1
28-410 Standard Bottle Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very common bottle cap standard often used for your typical PET caps.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 246
- Wydruki
- 1
- Wyświetlenia
- 770
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
Used the standard dimensions found at the link below to quickly spin up a 28-410 cap.
The first number is the thread diameter: 28mm. The second number is the standard thread style. 410 means 1.5 turns.
Pitch width in this case was 4.24mm.
To make a standard cap, measure the diameter of your threads and count the number of turns - if it's close to one of the standard sizes (mine was 27.6mm with 1.5 turns), just follow the spec.
