1 / 1
28-410 Standard Bottle Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very common bottle cap standard often used for your typical PET caps.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 246
- Makes
- 1
- Views
- 770
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Used the standard dimensions found at the link below to quickly spin up a 28-410 cap.
The first number is the thread diameter: 28mm. The second number is the standard thread style. 410 means 1.5 turns.
Pitch width in this case was 4.24mm.
To make a standard cap, measure the diameter of your threads and count the number of turns - if it's close to one of the standard sizes (mine was 27.6mm with 1.5 turns), just follow the spec.
