1 / 11
Hunternet Legacy Fox - High Detail FDM (Glue Only) — zdjęcie 1
1 / 11

Hunternet Legacy Fox - High Detail FDM (Glue Only)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1/100 scale SF-13 Legacy Fox from the upcoming PvP space combat simulator, Hunternet. A collab with OG author, Evocato!

Ocena
0 / 5
Polubienia
15
Pobrania
74
Wydruki
0
Wyświetlenia
324
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The 2x “PSlicer Setup.3mf” files are ready with recommended inputs: For the model .3mf, move the sheet groupings as needed. For the logos, the bi-color layer pause and a sacrificial tower to aid filament change are set.
Alternatively, a basic STL is provided for each print sheet (see folder: SF-13 Print Sheet STLs)

Recommended Inputs with PrusaSlicer + Prusa printer:
  • Nozzle diameter = 0.4mm
  • Material = PLA
  • Layer height = 0.15mm (Quality)
  • Perimeters = 2
  • Infil = 15% (Gyroid)
  • No support material
  • Filament Settings > “Other Layers” temperature = 205 degC
Assembly Tips:
  • Take your time
  • Only a small amount of superglue is needed
  • It helps to build 1 group of components at a time - let parts sit in a good orientation while waiting for the glue to bond (e.g. for Step 5, rest ship on its side for each side-hull)
  • Have fun!

>>> Full-resolution instructions are attached in Other Files

 

>>> Become an SF-13 pilot @ hunternet.gg

Tagi