1 / 11
Hunternet Legacy Fox - High Detail FDM (Glue Only)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/100 scale SF-13 Legacy Fox from the upcoming PvP space combat simulator, Hunternet. A collab with OG author, Evocato!
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 74
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 2x “PSlicer Setup.3mf” files are ready with recommended inputs: For the model .3mf, move the sheet groupings as needed. For the logos, the bi-color layer pause and a sacrificial tower to aid filament change are set.
Alternatively, a basic STL is provided for each print sheet (see folder: SF-13 Print Sheet STLs)
Recommended Inputs with PrusaSlicer + Prusa printer:
- Nozzle diameter = 0.4mm
- Material = PLA
- Layer height = 0.15mm (Quality)
- Perimeters = 2
- Infil = 15% (Gyroid)
- No support material
- Filament Settings > “Other Layers” temperature = 205 degC
Assembly Tips:
- Take your time
- Only a small amount of superglue is needed
- It helps to build 1 group of components at a time - let parts sit in a good orientation while waiting for the glue to bond (e.g. for Step 5, rest ship on its side for each side-hull)
- Have fun!
>>> Full-resolution instructions are attached in Other Files

>>> Become an SF-13 pilot @ hunternet.gg