Counting matching models…
Instead of measuring and printing a basic rectangle to act as a spacer each time a drawer was reorganized, I created this adjustable spacer. The teeth are spaced ~3mm and the clip can slide to the appropriate position and will stay in…
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
Some time ago, I inherited an American Silver Eagle that was not encapsulated. I ordered a package of 25 direct fit H-40 capsules thinking that I could also encapsulate some old large dollars I had, but I didn't realize the Silver Eagles…
The box for this game is obnoxiously big and the lid never stays shut. I created a spacer that allows all the components to fit into one of the drawers and cut the lid off the box and reused it as a lid. Print Settings Printer: BIBO 2…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it robust. Material Used - PETG, or any you would like . like PLA Tolerance - 0.25 Supported PTFE Tube - 4mm OD…
I made this so i can easily route two spools filament from my Creality Space Pi Plus to my Creality K1 max. Layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it…
This is an unofficial design of the Starship vehicle by SpaceX. Keep small parts away from children. Starship-Keychain A simple Starship-Keychain or Badge. Versions both with the hole on the front and the back. Inspired by the awesome…
Adapter to combine a ducky macro pad and spacemouse into an easy to reach
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
This planter is perfect for anyone who loves plants but might not have a lot of space! It’s also great as a decorative piece for your home. The build uses a 25mm dowel and 3.5x13mm chipboard screws, making it sturdy and simple to…
This Sencor SFD 851GR Spare Drying Tray contains two parts, so you can use just the frame and make a space for filament with it. The model is bigger, so you will need bigger printer.
Simple spacer that raises the switch by 2cm. It leaves a horizontal cooling channel below. A fan placed on the side can cool both the Flex XG and the device below it. It's designed to rest inside the switch's wall mount cutouts and…
Since MosaicManufacturing was amazing in their creation of the remastered Catan board game, I thought their creation deserved more realism. That's why I designed these game stones. I hope you feel like you're walking through your hubs…
Hi Guys, I created a spacer for the Shotgun Pro Seat. It works with every bike that has the Acros Cable intergration through the Headtube. Just directly put the Shotgun Spacer Cable directly onto the Top Cap, where the cables are coming…
Needed 7 filament guides instead of the regular 6. Rather than making a fixed set, I opted for a dovetail rail with separate guides, so I could print as many as I need while still being able to adjust back to 6 or other number later…
simple 12mm thick spacer for wall mounting hand sanitizer units so you can still access the buttons for bottle replacement. Spaces the back side of the sanitizer off the wall when you have have trim or door frames on either/both sides.…
I needed to lift up my linear rail slightly to use the NeedItMakeIt Y-axis Linear rails, so I designed this. It would be suitable for anyone who ever needs a shim for a MGN12 linear rail, for any purpose
The smaller version of spool holder was designed. Total length is - 83.5 mm, and 73 mm sticks out when it's installed. I hope you will find it useful. Hello from Ukraine)) 3D printing settings Printer Settings: 3 walls - 0.4-0.42 mm 3-4…
This is a remix to create a 30mm-spaced-hole hinge. The goal was to replicate the dimensions of these hinges that I could not find in the US: https://www.amazon.de/gp/product/B0B5ZMNNGN These hinges were used in @Surfalex2000's Prusa XL…
This spacer supports the fins on a baseboard radiator. It fits on top of the struts that hold up the heating pipe and spreads the load across several fins.
I downloaded the “Screw Lock for Klipper” bed ( https://www.thingiverse.com/thing:6070269 ) from xand3r40r93 and printed out matching spacers with TPU 95A. It works flawlessly and is bombproof, and it can hurt your fingers when adjusting…
The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…
Combination of dome and the large knob for the SpaceMouse Mini v3 so you only have to print one piece and save 4 screws.
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
During the kitchen restoration I have been worried I would make a simple mistake and mix up hot and cold water pipes. This small set of clips helped me to make sure I don't du such a silly mistake. Further more I wanted to maintain…
Remix of @AlexA_214456 's PI 3 B+ Case with a larger top part to accommodate hats. Get bottom part in original model!
This 3D-printed spacer block is meticulously designed to adapt the Tapcooler Nanocanner for compatibility with the BenchMK Drill-Powered Can Seamer. Engineered for precision, it provides a secure and accurate fit, improving both the…
This precision-engineered spacer is designed for TV mount installations. Key specifications: Length: 21mm Outer diameter: 15mm Inner diameter: 3.95mm Material: PETG Infill: 100% Optimized for strength and durability, this spacer ensures…
There's space for a 6x3 magnet in the base, but if you don't need one just don't worry about it and print as is.
I printed this model from simple PLA, it does not require any support. It was sliced with a layer thickness of 0.2.
Kappen für Ikea Ivar-Seitenteile - genutzt, um schrägen Fußboden auszugleichen - auch als Schutz vor Nässe auf dem Boden denkbar
Use layer height of your choice the pen stand is to be printed in vase mode, and the base can be printed with 20% infill. It is a rather simple model and easy to print but makes your desk book good and the fit between the pot it and the…
gridfinity refined baseplate — now extra, extra minimal! kinda! I ran out of space in my hardware drawer, so I needed to make baseplates. I like Gridfinity Refined, but I really didn't want my new baseplates to have magnet slots. editing…
A spacer for loose Momentum3 earcups, makes your earcups super tight 95A TPU is recommended You will need 2 for each side, 4 in total for each side you should put one under the steel headband, another on top of it, like in the photo
This is a heatsink spacer for my microinverter project . Requires heat resistant filament (ABS as a minimum), the more resistant the better. For MCINV5 / MCINV6 / MCINV7 / MCINV8.
Hello. Today I prepared Benny the space guy form The LEGO movie. Benny is approx. 45cm tall. Scale 10:1. For print you do not need MMU unit and the glue is not needed also. Because it is quite big guy I recommend use 3 perimeters, 15%…
This is a Multiboard hanger for Ryobi battery chargers that have holes spaced 114mm apart. You will need small thread T-Bolts to attach to Multiboard. 2/1/2025 - Uploaded Version 2. Has longer pegs so that it fits snug, but not too snug…
A friend created this file for me when my the debris cover on my rain barrel was destroyed in a hail storm. Hopefully this will come in use for someone somewhere.
Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…
if you have problem with your build plate being to low on your build plate you can add these spacers to make the bed higher i printed this for my creality ender 3 v3 se and depending on printer and printer settings its around 0.5mm spacer.
Use it in a fold to create a space between the non-woven masks and the lower part of the nose. The thin thread that can be made in the vent hole after the print disappears by adding instantaneous heating to the thread with Lighter. When…
This is two plastic spacers from an old IKEA wooden lamp. One is the half on which the light bulb hangs, the other is the lower spacer.
Twisted ladder line spacers 25mm conductor distance 24° twist 12mm tall 2.5mm wire diameter (with insulation) Printed in ASA, no infill, 3 perimeters. 2 part assembly that simply clips together. Separators have a 24° twist, so you will…
A spacer for LBoxx cases with hexagon patterns in the lid. Bosch does include spacers made from styrofoam sometimes but this model enables you to customize your Sortimo cases to your needs! The print profile combines PLA and TPU to print…
5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.
this fills in the gap between an ssd and a full size 3.5 inch hard drive in an external docking station. the outer dimensions are the exact dimensions of a standard 3.5 inch hardrive, the gap is the exact dimensions of a sata ssd. this…
No instructions needed. Print one for each of the Exterminators. We also printed one for each of the Genestealers, though it's not needed for all of them, but makes the models stand more reliable.
This is a set of blocks that can be used to recreate the Classic Space X1 Patrol Craft released in 1980 at 250% scale. The stl files for this set can be found in the "stl files" folder below. Please use the set inventory on bricklink…
This is a set of blocks that can be used to recreate the Classic Space Buggy released in 1979 at 250% scale. The stl files for this set can be found in the "stl files" folder below. Please use the set inventory on bricklink located here…
This is a set of pieces that can be used to recreate the Classic Space Futuron Blue and Futuron Yellow figures at 250% scale. These figures were introduced in 1987 and included in numerous sets between 1987 - 1990. All of the stl files…
This is a flexible TPU spacer designed to bridge the gap between thin motorcycle mirror stems (or windshield bars) and standard phone holder clamps. Most phone holders are designed for handlebars with larger diameters. These adapters…
This spacer keeps a monitor from rocking side if fine height adjustment is used. This is important for dual or triple monitor setups with non-matching monitors. The set screw allows setting the relative height between monitors. The issue…
This is a spacer intended to go into vacuum bags pumped free of air via a manual pump pressed against the outside of the bag. Pressing the pump against the top of the bag seal also prevents the air from escaping because it pushes the top…
This might be of interest to collectors of the Space 1999 Eagles from https://gerryanderson.com. I was running out of space, so created this stackable stand for use with the bases which come with the Eagle models from the Anderson store.
10mm spacer for CR-Touch on Ender 3 models, for volcano mods Category: 3D Printer Extruders
Colored layer is slightly elevated so people with less advanced printers can print it in two colors just by pausing and changing filament when it starts to print! 4,5mm hole
Hola……Por fin me atreví!! Algo sencillo que le encanta a mi hermano, pensé…Consumí mucho tiempo para esta pequeña bobada, pero mola!!!!!! Básicamente son modelos copiados de resultados de imágenes de google. Resueltos desde cero en…
Arduino code: https://github.com/AndunHH/spacemouse !!!buttons must be manually activated and set!!!
I didn't want to stick it to the wall but hang it => spacer with a hole for the screw head. Nechtěl jsem lepit na zeď ale zavěsit => distanční podložka s otvorem na hlavu šroubu.
I rounded the edges a little bit more compared to the original model, now with a 2mm radius. This results in a better UX due to less pricking. Images: left is original model, printed in black JAYO PLA. Right is my remix, printed in blue…
Just a spacer I made to get a little more height out of each 6mm standoff when doing a custom cooler for a Pi 5.
Volume Spacer for Öhlins TTX 1 Air shocks. 2000, 4000, 6000 mm^3 *not tested but should work fine, just modeled after the original parts because i wanted to know the volume. Uploaded here if someone needs them
Summary SpaceX Starship Mini Model – Keychain & Display Version 🚀 Bring the Future of Spaceflight to Your Keychain! 🚀 This is a miniature model of SpaceX’s Starship, designed for keychains, desk displays, or any other space-themed…
Have fun! Easy and quick multicolor prints. They'd also be fun to paint.
Leider ist der Link zum Original-Teil gebrochen. Ich habe ein paar kleine Änderungen vorgenommen, die den Druck erleichtern und den Materialbedarf reduzieren. Ebenso wurde die Fuge zum Bauraum harmonisiert. Die Platte für die Handyablage…
Not my original model. All files and images were created by Thingiverse user Omniverse I just wanted to reupload this file to printables so that I could add it to the boat parts collection on my profile. Be sure to go give the original…
I designed electrical outlet stand-off spacers for securing outlets to the electrical box while keeping the outlet flush with the exterior wall surface; that model is here: However, when installing and sizing these spacers, it was kind of…
Plastic bags with a vacuum valve are very helpful for storing filaments in a dry condition. Pressing the pump onto the valve during vacuuming is unavoidable, but closes the airway. To make this process easier, I have designed this little…
Spacers of different heights for IKEA Metod wall cabinets. The original size is 10 mm.
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
1. Add a hole for screw. 2. support a bit wider ziptie. Thanks for @russdogg creation!!
Just the little table thingy to hold up the middle of a pizza box. You can edit the number of legs as well as the length of the legs. Designed this quickly after a long day of work because I had a headache and just needed a simple detox…
Remix of “Patio Umbrella Stand Top Spacer”. Dimensions: Inner diameter: 34.5 mm Outer diameter: 50.4 mm Flange diameter: 60.2 mm Overall length: 68mm
I designed this to fit my iPhone 12 Pro. I don't know if the dimensions for the 12 Pro and iPhone 12's are the same, so I don't know if it will fit a regular 12 or 12 Pro Max. If you try on something other than a 12 Pro, please leave a…
Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…
This is a refresh of one of our earliest models, the classic space mega-figure published in July of 2024 which is based on the classic space figure originally released in 1979. This figure was available in red and white when initially…
These are spacers that can be connected to either Multiboard Plates (previously Tiles or Panels) using Dual Clips. The default files are two Multiboard units long and go from 7 mm up to 24 mm in 1 mm increments. Usually it is enough to…
This toy is fully 3d printed and features quite simple yet perfectly working suspension . You can even print your own bearings for wheels if you want. Those bearings however are compatible with 625Z bearings (16x5x5 mm). Print chasis Add…
📦 Description This is a 2-part printable set consisting of: 🧩 Hex spacer (nut) with internal thread 🔩 Flat-head screw with external M6-style thread → Both fit together smoothly and can be printed without supports on most FDM printers. Use…
This simple spacer is designed for rabbit hutches to slightly raise the horizontal bar behind the door – the one that keeps hay from falling out. By lifting the bar a few millimeters, this spacer helps prevent rabbit urine from pooling…
📦 Description This is a 60 mm tall printable spacer with internal threading, compatible with standard M6 bolts or screws. Great for: Mounting electronics Spacing plates or panels Prototyping mechanical setups Swapping in for metal spacers…
Unless your extremely lucky, most drawers won’t fit the Gridfinity baseplate perfectly. Since we have 3d printers we can get them to fit perfectly so the bins aren’t sliding around when you open the drawer quickly. It can be difficult to…
3D printed spacer to be used with the Robot_Retro Gamecube power supply. robot_retro store
This is a pretty rough but already functional prototype of an armrest spacer for the Alfa Romeo 159. With my height of 176 cm, the armrest height with the spacer became just perfect — before, I could barely even reach it. For now, I’m…
Karting spacer tool very handy. Use an O-ring in the back to prevent the tool from sliding out! Print: Material: PETG, could work with PLA. Standard profiles in slicer very simple.
If the bed fits the plate model horizontally it would be perfectly printed without supports. On my Ender 3 V3 SE I've printed it on a side with supports. There is no precision compensation gaps applied between legs and plate in the model.…
Spacers for a wire fence / mesh panel in order to mount the mesh panel to a wall or fence. Available in two lengths: 20mm 40mm Use the appropiate hardware for your backwall (wood = woodscrews / concrete, bricks: plug + screw) Probably the…
Say hello to RoboTray — your new desktop sidekick 🤖 This little robot is not just cute — it's useful! Designed as a small open organizer, it’s perfect for holding keys, coins, AirPods, flash drives, jewelry, or any other tiny treasures…
[updated 7/2/2025] 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer. Replaces the original open cell foam that sits between the cabin air filter housing (with the interior/exterior air flow actuator) and the duct leading to the…
I couldn't get a good scale from the original posted from @sillybutts, so I re-rendered to scale. No other edits or alterations have been made. Included flat side for printing support aide, I recommend printing this at 100% Infill, with…
This is a spacer for the BMW r1250GS battery compartment. It should also fit the r1250r, and r1250RS Or any motorcycle by scaling the dimensions in slicer Designed to fill that empty gap left by a smaller and lighter lithium battery when…
![TT SpaceMouse V2 - mounting for 4/8 MX Switch adapter [45 degree angle]](https://media.printables.com/media/prints/c17b23dc-4d91-42ab-b530-3f59bf4e5afd/images/9338696_b5b10274-5e00-4788-a390-84c0ce7ae1fc_02b600ec-7495-4f4e-bac0-cebd85aa2af0/render-test.png)
![[updated 7/2/2025] - 2012 Jeep Wrangler JK Interior Cabin Air Plenum spacer](https://media.printables.com/media/prints/cac66c3d-f414-4c7c-9eff-302ab8076bfa/images/10106236_a72997ff-098d-4c52-a1cf-433601146e4b_2621f605-70af-4e7a-8d89-c8767bd2ce10/cabin-air-plennum-original-foam-jeep-jk.jpg)
