Mail owl with space for a letter (with and without log) Harry Potter Hedwig style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Best way to print the owl is the log in wood filament and the owl in white. In this way, you get Hedwig the owl from HP
- Rating
- 4.917 / 5
- Likes
- 258
- Downloads
- 2,883
- Makes
- 15
- Views
- 11,632
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
The best way to print the owl is the log in wood filament and the owl in white. In this way, you get Hedwig the owl from HP
You will find the owl in 2 versions.
- The owl directly on the log
- The owl and the log separately, in that way you can print the log with wood filament and the owl in another filament.
I printed the owl and the log separately. In this way was able to print the log with wood filament.
With 0.2 mm layer height, the print of both parts needed about 12 hours.
If you want to print the log separately, you need to use support material for the owl, otherwise you can print it completely without support material if you tweak the settings a bit.
This owl is a remix from the following model: https://www.thingiverse.com/thing:174388