Wardrobe Space Saver
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.60 – €5.63 net (excluding VAT)
For file: wardrobe-space-saver_02mm_pla_mk3s_5h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.12 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 5.07 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wardrobe Space Saver This is a space saver for your wardrobe.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 132
- Makes
- 0
- Views
- 1,031
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Wardrobe Space Saver
This is a space saver for your wardrobe.
The hook can move freely and lock into 3 positions, you can also turn the hook 360°.
There are only little supports needed for the print and the hook joint is printed in place, so no assembly will be needed there.
Assembly guide:
- Print the hook and the main body, you can also use the 3mf or gcode file which is already pre configured.
- Turn the hook joint a little to set it free, it should move easily afterwards.
- The hook can be guided in to the main body through the opening.
I recommend to use the .gcode or .3mf file as this is already correctly orientated and sliced.
+++++++++++++++++++++++++++++++++++++++++++++++++
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!
Happy printing!
Print instructions
Watch your slicer to correctly bridge for the main body, may change the bridging angle (I also did this for the 3mf and gcode)