Wardrobe Space Saver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wardrobe Space Saver This is a space saver for your wardrobe.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Wardrobe Space Saver
This is a space saver for your wardrobe.
The hook can move freely and lock into 3 positions, you can also turn the hook 360°.
There are only little supports needed for the print and the hook joint is printed in place, so no assembly will be needed there.
Assembly guide:
- Print the hook and the main body, you can also use the 3mf or gcode file which is already pre configured.
- Turn the hook joint a little to set it free, it should move easily afterwards.
- The hook can be guided in to the main body through the opening.
I recommend to use the .gcode or .3mf file as this is already correctly orientated and sliced.
+++++++++++++++++++++++++++++++++++++++++++++++++
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!
Happy printing!
Print instructions
Watch your slicer to correctly bridge for the main body, may change the bridging angle (I also did this for the 3mf and gcode)