Drawer Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.64 – €3.22 net (excluding VAT)
For file: Drawer Spacers_0.4n_0.2mm_PLA_MK4S_1h40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.93 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 1.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spacer to assist in installation of drawer faces.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 95
- Makes
- 0
- Views
- 557
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
These are a simple way to provide a 1/8" gap between drawer faces when installing them on the drawers. When I previously tried using a piece of wood, it was flat and would often fall off. These spacers have a 90 deg. face that helps to keep them from falling into the drawer. I had considered adding a small lip in the front (to keep them from falling out of the drawer), but then I would need several different sizes for different thickness drawer faces. I didn't think it was worth the effort. Also, I made them a nice bright color to make them easy to find among all the wood. They are also less likely to get thrown out like a 1/8" strip of wood might be.