1 / 6
K40 40W Laser Table Disc Spacers/Standoffs M3/M4 Bolts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix with metric bolts, M3/M4. In my remix the disc is 20mm and and a bit thinner.
- Rating
- 4 / 5
- Likes
- 16
- Downloads
- 65
- Makes
- 1
- Views
- 973
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a remix with metric bolts, M3/M4.
In my remix the disc is 20mm and and a bit thinner.
STL model for both M3 and M4 screws (I use M3x30 screws).
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 15% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed
Print in ABS or similar hard plastic.