Counting matching models…
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
Used these models to reuse my old ender3 power supply. Used a pcb from aliexpress https://www.aliexpress.com/item/1005006578600241.html and some stick on silicone feet. The back cover is a model from…
No screws needed 2 part case Print 99.9% infill, 0.2mm layer size any material
This is an enclosure system for an arm or wrist wearable sunlight readable e-paper display microcontroller that you can program for whatever purpose you might have. It is based on the Pimoroni Badger 2040W. I started with Andreas's…
Creality Falcon 2 40W Laser Crosshair Bracket Should fit all the Falcon models. Used this as inspiration:…
Falcon2 Pro Collection This is a set of half fan intake shrouds to help the laser unit not pick up particles from the surface being worked on to minimize build up in the cooling unit. Creality does provide instructions on how to pull the…
A mounting holder to attach a Dell 240W adapter neatly to a desk.
A 3D printed case for Pimoroni's Badger 2040 W e-ink RP2040 with WiFi badge: https://shop.pimoroni.com/products/badger-2040-w a remix of usedbytes https://www.thingiverse.com/thing:5320100 - compared to his, on mine, the USB port is a…
Dell 240W 7,4mm GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Ultimate 140W FPV Power Bank Case (PD 3.1 28V 5A / 2-6S LiPo) This is a rugged, active-cooled housing for the 140W Bidirectional PD 3.1 USB-C Module With XT60PW-M connector . It turns your 2S–6S FPV flight packs into a high-performance…
This is a 3018 CNC mount for the Laser Tree Laser Module (LT-40W-AA) and maybe others? There is a block on the side for the air assist hose to be secured with a cable tie. Category: DIY
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
This model is a remix and just contains stl file.
passend für: https://www.amazon.de/gp/product/B079FRHS46/ref=ppx\_yo\_dt\_b\_asin\_title\_o05\_s01?ie=UTF8&psc=1 Print Settings Printer: Ultimaker 2+ Rafts: Doesn't Matter Supports: Doesn't Matter Category: Gadgets
passend für: https://www.amazon.de/gp/product/B00VUGOSWY/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1 Category: Other
This is a mount for the Creality Falcon 2 40W Laser Cutter to add a Laser Crosshair. I just wanted something sturdy and didn't move when I touched it and thought I might share :) First ever upload, hope it works well for you guys (and…
My first model that I'm uploading. Recently I have bought for myself badger2040w and couldn't find a case that I'd be happy with. I wanted to have an ability to charge battery without disassembling anything and be able to either wear it…
More Gridfinity stuff! I moved where I used to store my power adapter from a shallow drawer to a deeper one, so storing in vertical manner is possible (different from my original design) . There are other models to store it vertically,…
inmovilizadores para dejar fijo tanto la grabadora laser como la base para evitar tener que estar alineando a cada rato. se fijan con tornillos a la base de madera o a la mesa (recomendable una tabla para no romper la mesa). se tendrá que…
Dies it ein Remix von https://www.printables.com/model/386295-dp50v5a-lab-bench-power-supply-case Änderungen: Frontblende: Buchsen für normale 4 mm Bananenbuchse angepasst. Rückseite: Ausschnitt für Kaltgeräteanschluss nit Schalter und…
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
Remixed this well designed cord organizer. Thanks to @curby_289762 for the great design and making the fusion files available for remix work. added a hook to hold the outer wrap pushed in inside surface .25mm to tighten on charger block…
organizer for singel or multiple laptop chargers modular. printed on a bambou X1 carbon .4 nozzle .2 layer high with PLA can insert 8X3MM neodymium magnets (not necessary)
I really like the handle on the Jury-Rigged Boomstick remix Shirley Productions did on their original Libra, but preferred the barrels on the original, so I mashed those two frames together and it's a banger. Barrels were also too large…
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
Thanks Peter H for making the original customizable via OneShape! M4 screw will fit on the open piece to allow removal of the power brick. If you don't want the open end, then print 2x closed ends.
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
Bester Abluftkrümmer für deinen S1 - Seitlicher Ausgang - AD=100mm. Update: Auf Wunsch hinzugefügt, Datei für den original xTool Schlauch, welcher aufgeschoben wird: "Seitlicher Ausgang_originalSchlauch_AD74mm.obj" Konstruiert in FreeCAD…
easy to print / one piece Air assist nozzle for most K40-Lasers. It's the updated version with a normal 12V blower. So there is no hose in the air. break away supports included ;-) Print Settings Printer: Upgraded Geeetech i3 c Rafts:…
Remix of Andreas Kanner's excellent Badger 2040w enclosure design. Thanks for sharing the .STEP files! printed in PLA For ‘battery mount’: organic supports, flat side to print bed other components used: 1x Pimoroni Badger 2040w 4x M2 x 8…
Used these models to reuse my old ender3 power supply. Used a pcb from aliexpress https://www.aliexpress.com/item/1005006578600241.html and some stick on silicone feet. The back cover is a model from…
Es geht um ein Gehäuse für folgendes Netzteil: https://amzn.to/3Q7t0pd Ich habe mich beim Amazon Partnernet registriert, verdiene daher als Amazon-Partner an qualifizierten Verkäufen und bedanke mich daher, wenn ihr die Links nutzt. Ich…
I designed this model to cradle the power adapter for the Ulanzi 40w lights. This helps reduce cable stress when the power supply unit would otherwise have to hang in midair putting stress on the cable and the power connector. I only have…
No screws needed 2 part case Print 99.9% infill, 0.2mm layer size any material
The HP LaserJet MFP M140w always feeds the paper at an angle and the printouts become unusable. That's why I designed a paper guide. Simply attach the two brackets. The paper is no longer fed at an angle. The paper guide is needed twice.…
Based on this module: 4s/100W module (Aliexpress) Need two long screws 3x40mm. Can be printed without supports. Supports almost all “fast charge” protocols: PPS/AFC/FCP/QC3 +/QC3.0/QC2.0/SCP/VOOC/PD3.0/PD2.0. Optional flashlight LED can…
This is an enclosure system for an arm or wrist wearable sunlight readable e-paper display microcontroller that you can program for whatever purpose you might have. It is based on the Pimoroni Badger 2040W. I started with Andreas's…
Creality Falcon 2 40W Laser Crosshair Bracket Should fit all the Falcon models. Used this as inspiration:…
Finally managed to get a quick swap kit, and while the plate for the original toolheads and 10W toolhead lines up the original mount holes, keeping the focus length the same, not so for the other lasers. The 40W and 2W IR both slot down…
I fixed the broken legs of my Spigen S540W using a custom model, but things didn’t go well—it broke on the first use. I’ve now designed another model from scratch, and it seems okay for now.
Be carefful, please desolder capasitor from powerbank module and solder to wire to save space. I used: AMASS XT60E-F 1 Cover Y Metal 5.5X2.5mm DC099 Brass Hot Melt Insert - Length 4mm 50pcs, M3(OD4.2mm) KCD1 Power Switches - Black 2Pin,…
This right here’s a stand charger for the LDNIO 140w – first version I knocked up, innit. You lot can just print it straight up with whatever settings suit ya. If I get a bit of time later on, I’ll probs add a slot for a cooling fan ‘cos…
Falcon2 Pro Collection This is a set of half fan intake shrouds to help the laser unit not pick up particles from the surface being worked on to minimize build up in the cooling unit. Creality does provide instructions on how to pull the…
Connect 38mm vacuum hose to get fresh air for laser cooling fan. I have mounted mine with 2 of the laser top cover screws. I have the vacuum hose coming though a hole that I drilled to the tabletop. Printed with supports using PETG for…
Mount for a great big 24V → 12V automotive buck converter to mount inside an Ender NG electronics compartment using the generic DIN rail mounts
Remixed from this: https://www.thingiverse.com/thing:4200890
This power bank is very easy to assemble and not so expensive). I ordered the power bank board and the BMS board on ALI. They cost me 11.3 dollars. The batteries are used from a scooter with a final capacity of 2500 mAh. You can use only…
Warning! I broke mine when I took these off and I had to glue the rotating focus part back in place. I'm not sure how it was originally attached. So my recommendation goes for softer materials than what I used, 95A. Accessory designed to…
A mounting holder to attach a Dell 240W adapter neatly to a desk.
Designed to be used with the standard mounting plate (not the angled one). To install the housing, simply loosen the screws on the doorbell’s mounting plate and slide the housing into position behind it. A small clearance at the top of…
Additional parts: 4x M3 heat insert, 4.2mm outer diameter 4x M3 bolt, length anywhere between 10mm and 30mm. Assembly: Install the heat inserts in the front part's back side cavities. Slide the device into the front part, from the back.…
A mount for connecting Falcon 2 and AtomStack Lasers onto CNC or custom laser. I print in carbon fiber nylon or petg. More info about project here: https://github.com/drewgreenwell/Falcon2Universal/
Das 140W Netzteil kann mit dieser Halterung ohne Werkzeug heraus genommen werden und ist nicht fest verbaut. Einfache Montage mit 4 Schrauben 3x16 mm mit Senkkopf. The 140W power supply can be removed from this bracket without tools and…
Made in Autodesk Inventor (ipt file included)
This Mostly-printed Z-axis for Neje 30W/40W laser modules is a mashup/modification and remix of a couple of designs: Silvester's 3D-Printed CNC Z-axis for Nema17 (Pinshape) and leadscrew/nut from 3DPRINTINGWORLD's Linear Ball-Bearing…
This is a printed air-assist nozzle for the NEJE 30W and 40W "new style" laser modules with the amber/red window. Simply replace the window with the nozzle part and insure the lens assembly is properly fitted into the cone. Attach a 6mm…
A 3D printed case for Pimoroni's Badger 2040 W e-ink RP2040 with WiFi badge: https://shop.pimoroni.com/products/badger-2040-w a remix of usedbytes https://www.thingiverse.com/thing:5320100 - compared to his, on mine, the USB port is a…
Triangular hinge connector for a desk or floor lamp. Allows adjustment of the lamp arm angle. 3D printable replacement f
Mount your dell power supply to your opengrid wall!
Case for DC 6-30V 140W Multi Protocol Desktop Intelligent Fast Charging Module
This is a Milwaukee M12 battery-powered handheld light using a single 3" off-road LED pod in a custom printed housing with a latching push button switch and inline fuse. This model is shared for personal/noncommercial use and includes…
Difusor em grade para modificador ulanzi mini bowens
This is a panel mount interface for a USB-C PD battery charge/discharge module. 140W 2-6S Lithium Battery Charging Board Bidirectional Fast Charging Module With Automatic Temperature Control Function IP2366
Dell 240W 7,4mm GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Hast du auch Probleme mit der integrierten Kamera? Dann ist das jetzt die Lösung! Mit meiner Halterung für einen 12mm Kreuzlinienlaser kannst du das Werkstück problemlos ausrichten und dabei ist es egal, ob es flach aufliegt oder in einem…
Ultimate 140W FPV Power Bank Case (PD 3.1 28V 5A / 2-6S LiPo) This is a rugged, active-cooled housing for the 140W Bidirectional PD 3.1 USB-C Module With XT60PW-M connector . It turns your 2S–6S FPV flight packs into a high-performance…
This is a 3018 CNC mount for the Laser Tree Laser Module (LT-40W-AA) and maybe others? There is a block on the side for the air assist hose to be secured with a cable tie. Category: DIY
I made 4 versions for different focal length settings.You should use some rubber ring for sealing from the laser side (red circle on picture) Air input diameter is 5.4mm My air source - 2x CT-404 silent aquarium air pump…
This repair kit will help you repair the most common broken part, FOR THIS MODEL ! MAY NOT BE COMPATIBLE WITH OTHERS !
[DE] Leistungsstarker DIY-Zylinder-Lautsprecher mit TWS & 140W PD Dies ist ein robuster, zylindrischer 2-Wege-Lautsprecher, der auf erstklassigen Sound und mobile Power ausgelegt ist. Das Gehäuse ist für einen 16,5 cm (6,5 Zoll) RECOIL…
This power supply can be purchased from the following link . This model was created using manual measurement. Mounting points included in model are accurate (see included photo).
Overview Protective cover for this generic Makita battery 140W USB-C/USB-A adapter I found on AliExpress (probably fits other power-tool adapters of the same type) Prevents connector breakage when stored in e.g. backpack. Print Settings…
Transport cover for portable monitor Anmite 14 A140W05T My print settings: 3 perimeters 15mm brim prone to warping -> enclosure print speed 50% & stealth mode Angle 45° to print on smaller beds.
case for HBV 5640 eg Voron 2.4 ---- BOM: 4x M3x10 or M3x12 2x M3x5x4 insert 3x M2x4 tapping screw to mount the cam ----
I have Fosi Audio DACs and amps in one room, that feed speaker systems in two rooms. I needed a way to keep four of the Fosi power supplies straight. It’s a pretty simple design. 180mm square and a groove under each power supply so that…
Updated version for the eLeaf iStick 40W TC Battery mod. Category: Automotive
Parametric Toolrest for Parkside Grinding Machine (240W) STLs for two angles have been provided, but since the model is parametric, STLs for any angle can be generated 0 degrees (horizontal) 10 degrees (for grinding the lathe tool bits)…
I recently acquire a cheap chinese 40W CO2 laser engraver/cutter. It's great value for its price but not user friendly. The machine do come with red dot laser side mount next to laser head. It's simple but never line up correctly to the…
Anker 40W 5-Port USB Wall Charger PowerPort 5 Under Table Mount
Got the Sovol 40w laser head for use with the Xchange and wanted to mount it. With a static BL Touch mount (that stays on the printer with the electrics). Please see my other makes. Mounting the laser straight to the tool changer it sat…
Pete, very kindly skulpted these pulse rifle files to go with my full size T800 build and during our discussions I mistakenly gave him the wrong measurements. Old saying measure twice cut once. Well did I do that, No : ) I was so excited.…
A Neje 40W (A40640) module Air assist. (for 30W module see https://www.thingiverse.com/thing:4843808 ) It comes in two version. 6ID which has inner diameter of 6mm. 6.5ID which has inner diameter of 6.5mm. Height of the laser head should…
Made a case for the Aftertop 140w charger . Designed to be secured on the coffee table leg with cable ties. But I included step file so you can easily modify it for your specific needs.
djk4linux's air-assist nozzle for the Neje 40W lasers is a bit long for cutting thick materials. So I remixed it for some shorter options. https://www.thingiverse.com/thing:5073015 The original nozzle extends 15mm from the base of the…
I designed this adapter to fit my Neje 40W doide laser module onto my MPCNC. The adapter slides into a Bosch Colt clamp style router mount, like the one I designed here: https://www.thingiverse.com/thing:4632040 It's designed so the laser…
This is an air assist nozzle for the popular 40w Chinese (aka 'K40') laser. It directs compressed air at the 55mm focal length of the included lens. It has female threads for the hose that comes with the Harbor Freight Airbrush Kit (…
More Gridfinity stuff! I needed a place to properly store my 140W Power Adapter, so I made this bin. Since the smaller size it would fit is a 3x3 bin, I left a slot to also put the cable beside it.
While designing the Gridfinity storage bin to store the power adapter, I also made this model to make sure it would fit as expected.
Since my K40 laser came with a broken laser tube, I had to get a replacement. The new tube (real 40W tube) is 700mm instead of the original 630mm tube. I therefore had to enlargen the case. Since the power side is opposite of the laser…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount the Sovol 40W laser to your SV06 & SV06 PLUS printers. You'll need: 4x 6mm M3 cap head bolts 2x 8-10mm M3 cap head bolts Print laying flat on its largest face…
(References like [##] refer to specific labeled images above.) Note: Ensure that the cord clips line up correctly. If you print the files tagged "4b," you'll end up with clip positions shown in the photos. The files tagged "4c" will have…
Stand to hold a 140W Macbook charger vertical to reduce its footprint.
This is a spare leg for combined fridge+freezer Beko RCNA406I40WN Probably will fit to another model from Beko, but I have no way of testing it. Old one broke and was lost so I copied crucial dimensions from one that was left.…
