Counting matching models…
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
Small Plant Pot for cloning (optimized drain holes) Update : New files added Eject Tool Pot Cover Stand for 12 Covers Print without support
This is a 220mm (8.5 inch) L-square designed for use as a guide while cutting glass. The square is bulky enough to be sturdy and easy to hold in place. It is also easy to lift and reposition using the “lip” inside the inner triangle.…
This little jig is designed to help cut 4mm PTFE tubes with precision — ideal for Bowden tubes. The hexagonal hole holds the tube securely and has a 0.5mm slot sized for a utility knife or X-Acto blade. I made this because I was…
They are designed for 8 mm thick boards, and add a 4 mm thick base or foot. Could be scaled in Z (or in XYZ) for other thicknesses. The undersides have grooves which are printed first and then bridged. Ensure the first bridging layer runs…
Designed this to store my cutting mat under my desk. This is the cutting mat used https://www.amazon.ca/dp/B08DHDZKGS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 Should fit any sized cutting mat with a thickness of around 3mm. the…
Cuttingboard is a redesigned bed holder with Thumbscrews for toolless assembling and adjusting the bed, Reduces warping during and post-print, and is small enough to print on a smaller printer (i.e. Lemontron) [2025.12.19] add Bed Holder…
I created this to cut 100mm long 40mm OD tube for the squire blaster.
added extra tile holder from MRk's design to Shawn's laser file. STL from MRk is reuploaded here because Printables requires at least one model file to be present.
whelp, I'm at it again folks. this time l present to you my take on the Duncan professional or more commonly known as the Duncan Coca-Cola yoyos of the 90s lve bought 2 in the past from eBay NOS condition but lve realized that there…
New smaller cutting disc fot the mammotion Luba Advantages: Enlarged cutting surface thanks to longer blades Lighter than the original (<100g), therefore smoother running and less motor load Very quiet in operation Improved cutting…
Baking paper cutting aid for baking pan size: upper: 230 x 110mm lower: 220 x 100 mm height: 95 mm Fusion 360 modle is included, just adjust the first sketch to your baking pan sizes if it doesn't fit yours.
Designed for 95A Shore TPU (eg the excellent Eryone TPU, I have that in clear and black now) 0.4mm nozzle, 0.2mm layers, 4 walls and 100% infill. I also use a 2-line brim but spaced 0.5mm from the model ("brim distance", in Cura) so it…
Please use M3 SHCS screw to attach your Orbiter Extruder as the thick screw head will make the cutting arm stop at the right place.
Schneidebrett Halter Ständer – Artikelbeschreibung (Deutsch) Druckhinweis: Der Ständer besteht aus 2 Füßen (2× drucken) und 7 Bögen (7× drucken) Dieser Schneidebrett-Halter-Ständer ist für das aufrechte Abtropfen und Trocknen von…
Diese Schraube ist an einer Fliesenschneidemaschine kaputt gegangen. Ich habe sie deshalb nachgebaut. Als Schraube habe ich eine M8x40 Sechskantschraube eingeklebt. Da ich nicht sicher bin ob die Klebung im rauen Arbeitsalltag hält, habe…
Vegetable Slicer Organizer for: https://www.vevor.com/french-fry-cutter-c_11660/vevor-commercial-chopper-commercial-vegetable-chopper-w-4-blades-fruits-dicer-p_010148712974 Pegs are located 95.5 mm side to side from each other on center.…
This is a simple aesthetic remix of the Bed Stiffener from Art Nattanon’s "Cuttingboard" mod. While the original stiffener is great for structural rigidity, I wanted it to match the official branding of the Lemontron Rev E , so I…
A 2x3 gridfinity sized box for your ZTTO JGQ-001 steerer tube cutting jig. The Jig is available here: https://www.aliexpress.com/item/1005005638341992.html
Compact cutting board holder for vertical, space-saving storage. Keeps boards organized, separated, and easy to access. Differt angles are availabe. See pictures. Available options are form 36 to 44 degre. Just print 2 pcs and store your…
Minimal cutting board holder for 3D printing, keeps boards upright, ventilated, and easy to grab.
Laser Fiber cutting Nozzles Box Print with organic supports throughout, and support blocks on the hinges. Window made with 1 mm Acrylic, cut with Co2 laser, DXF & SVG files attached. Rotation axe made with fiber glass or carbon fiber or…
I shoot at reduced distance 7.5m I cut 45mm hole in blank or rifle Sius paper targets. With the 60mm 10m front its possible to make your own target from think paper. Fusion files included for making other sized hole.
Used a cutoff off a sphere as starting point for the template shape on the back of the box. Everything else is standard modelling.
So, if you have brought one of these biggies to the party, other people will likely try to lean on it, sit on it, and finally make the wheels crush into the base plate. While this is utterly annoying (from a behavioural and product design…
This guide, when screwed down to a cutting board or other solid surface, acts as a guide for rapidly cutting multiple 8 page zines. Guide here for folding this type of zine (no affiliation with that link). This guide fits 5 zines easily,…
Robak : 35mm and 70mm cutting jigs to cut 3mm steel rods, differential stand to fill with oil and holder for shocks to fill with oil. ‘bak: 30mm and 55mm cutting jigs to cut 3mm and 5mm steel rods.
This is my first 3D model, and I am not a CAD professional nor an engineer, just a 3D printing enthusiast. This model was drawn and designed in SketchUp. The main idea behind this model is to make a protector for the cutting disk on the…
Fan art silhouette of Itadori Yuji (Jujutsu Kaisen). Free for personal use. Not affiliated with MAPPA/Shueisha. DXF opt
Blindfolded sorcerer silhouette DXF for laser cutting. Fan art — personal use only.
Free DXF vector file of Kyojuro Rengoku in adorable chibi style from Demon Slayer: Kimetsu no Yaiba . Hand-drawn in Compass 3D with clean topology — ready for laser cutting on metal, plywood, acrylic, or MDF. ✨ Perfect for crafting: •…
✨ About the Design Faithful silhouette of Okarun — the shy, glasses-wearing occultist from the hit anime Dandadan . Perfect for fans who want to bring this beloved character into physical form as a wall decor, keychain, or custom gift. 📐…
This is a revival project inspired from Walnetto's cutting machine from 2018. The original version was made for house keys. Whilst it had a good basis I could see a lot of room for improvement. so here goes.. New improved clamping system…
Pro version! NOTE! - This revision requires an 8mm metal round bar at a max 169mm Length. This redesign greatly increases the accuracy of the key-cutting jig. allowing for a smooth glide and perfect alignment. This is a revival project…
This is a weaver's jig for cutting specific lengths of yarn and thread. To fully assemble the jig, you will need a long piece of 1x3" wood board and a short length of 1/2" dowel. There are three main pieces to the jig: the end bracket,…
Here I 'am again with my latest yoyo that l've been sitting on for a couple months, Speed Rims. Speed Rims is a yoyo that is 3d printed from 4 pieces instead of 2, the yoyo consist of 2 rims and 2 wheels/body. l made more than 4 separate…
These jigs help keep the extrusions aligned so you can cut up to 4 at once for very accurate lengths. The side plates are designed for M5 cap head screws. My extrusions have an M6 center hole but I've included M5 also. Also an alignment…
This jig allows you to split a 6mm GT2 belt into 2 3mm ones, with the use of a utility knife type of blade (but other blades can be used). I had better results by doing several runs on the same section of the belt instead of trying to cut…
The tray are designed in the way that makes all water go to your sink instead of whole kitchen; drying part and sponge tray are connected together to one spillway (all surfaces related to water are on an angle so water doesn't stay in). I…
This is a way of cutting On3 and On30 switch ties to length for a #6 turnout quickly and for multiple turnouts. If you need a different number or gauge let me know and I can produce a jig for you. I used the Fast Tracks turnout…
This device is a modular system designed to produce accurate, perfectly 90° cuts. It consists of two main components: a support body with integrated magnets and a replaceable adapter. The main body houses permanent magnets that guide and…
A unique 3D printable creation — this Over Cabinet Door Organizer Hooks, Holds Cutting Boards Lids, Space Saver Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
If you don't want to print the frame cutting template in 3D, I have taken the liberty of converting it into an SVG to print on paper instead. This paper template has the benefit of marking the center of the holes for easy alignment. The…
Gridfinity bin 2 x 6 x 4 for Knipex 26 12 200 needle nose pliers
Organize your kitchen and save counter space with this minimalist wall-mounted cutting board hanger. Designed to fit perfectly on walls or inside cabinet doors. This model comes in two pre-set versions (for 110mm, 80mm, and 70mm boards)…
A quick and dirty made rotary cutter for one blade on each side to cut stripes. As it is will cut 10mm stripes. You can add more washers to increase the distance. You need: two rotary cutter blades 45 mm 608 ball bearing (22x7mm 8mm hole)…
Mount the holder using 3M double-sided tape. The press-fit connection is a bit loose, so you may want to add a small amount of super glue for extra stability. Print the model in the orientation provided in the file for best results.
This is used and printed the exact same just the hole is moved to fix the catching issue
I ve been always struggling with cuttings falling inside the containers and rotting and when I was trying to get one out and all the others were all over the place. I ve tried some different solutions but I got them stuck or difficult to…
The people love arches. These are on the flimsier side, I reccomend 30 infill.
Simple and nice Easter themed egg bookmarks. A few variations that look even better with a color swap. Easy and fast to print! Print settings No supports needed Printing 0.1mm layers with a 0.2mm first layer add a color swap at layer 25…
Saw guide for accurate angle cutting (FreeCAD file attached). I printed with 0.6 mm nozzle, 4 walls and 50% Adaptive Cubic infill which resulted in relatively stiff walls when printing with PLA. Also I added a brim to reduce warping. This…
Bosch Palm Router Circle Cutting Jig (Small Radius Capable) This is a custom circle-cutting jig designed for a Bosch palm router, with a key improvement over most existing designs: it allows the pivot point to sit directly underneath the…
Specially made for cutting ClarkDietrich Mid-Flex corner tape, that has a plastic reinforcement, but will probably work on other tapes as well. 45 degree miter for door and window openings, and the other side can be used for a clean 90…
The 30mm long version needs a little bit more material but guarantees more precision than the 10mm one. Currently only for M8 bolts / 25mm diameter cutting dies but adapting this other formats shouldn't be hard. Usage Simply add this into…
It's a stand for a cutting block with drainage holes so it can dry. The base is detatchable so you can empty it. You may also like my Holder for Brushes and Sponge .
LeafGuide is a simple clip designed to move fan leaves out of the way—without cutting or damaging the plant. Instead of relying on heavy defoliation, LeafGuide redirects leaves outward to expose bud sites and improve light penetration in…
Sheath for an apparently fairly common kitchen knife. Another easy and quick print. Best results I had so far was with the following orientation (+ adding a bit of brim), using the default 0.35 Layer Height profile:
Modified Phaetus Dragon High Flow mount for Stealthburner v2.2 with Filametrix Mod . update on 8/5/2026 add FilamATrix Mod
Molds for cutting dough for ginger biscuits. ATTENTION DO NOT PUT IT IN THE OVEN IT IS FOR CUTTING COOKIES.
Re-uploaded [here](https://www.printables.com/model/801128-quilters-corner-radius-cutting-guide-25in) for the sewing contest… My wife is a quilter and uses these to cut different sized radius corners. She had bigger and smaller store…
This part replaces the original Cameo middle feeder rollers, as they're not providing enough pressure to support vinyl rolls and other materials for mat-less cutting. The problem to be solved There is a significant gap between the base…
Bowden Tube Cutting Guide (for 2.85 mm OD filament). This is a remix from the following part made for smaller bowden tube diameter (for 1.75 mm OD filament) "Guide de coupe pour tube PTFE by Franck75" available here:…
I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…
A Latch Hook Cutting Tool, to cut pieces of material to length. A spiralled bottom for easy grip.
This file is a cutting board that can be used for any occasion. It's easy to print and takes around 2 hours to print (1 hour with my creality cr10 se).
A great and easy way to cut foam tapes and any type of material that fits into it. Printing instructions: 4 X Screw.stl - 30% infill and 4 wall loops 2 X Holder Cube.stl - 15% infill and 2 wall loops 1 X Knife Holder.stl - 15% infill and…
Couldn't find proper MTB Handlebar cutting guide so designed my own. Print with PLA. Handlebar fits into hole very tightly. Happy trails!
My wife is a quilter and uses these to cut different sized radius corners. She had bigger and smaller store bought versions but needed a new size for a pattern she was creating. The guide is lined up such that the flat edges are in the…
Voici un support en 2 parties qui est simple à imprimer pour 2 pinces coupantes. Il s'adapte aux plaques ikea Skadis.
"Hook" for the Cutting Pliers . Single easy to print part. Need nest
A set of tools for cutting out agar cubes at approximate sizes. Includes “cork borers” but in square shape (SCAD/3mf file), and a chopping board(STEP file) with predefined slit locations for cutting. For the cork borers, set to vase mode…
Introducing a custom-designed table side support for the IKEA APTITLIG low-height table. This support securely attaches to the table's side, providing stability for holding a cutting table or similar items. While designed specifically for…
For storage of 4 inch or 4-1/2 inch angle grinder discs in 5.5 inch tall (or taller) drawers. Printing: No supports needed. This can be printed in a wide variety of materials. Recommended Materials: DURAMIC 3D PLA Plus Revision Log: Rev0…
this is a super simple 18mm to 16mm cutting jig for silicone spacers, i made this because i bought a silicone spacer pack from Creality that had 3 18mms when i needed 2 16mms and 2 18mms. you can use a regular flat blade razor for this,…
IKEA Finfordela Cutting Board Organizer This 3D-printed organizer is designed specifically for the IKEA Finfordela flexible cutting boards, offering a sleek and practical solution to keep your kitchen counter clutter-free. The organizer…
My original project: https://makerworld.com/en/models/622213#profileId-546322 The 3D-printed holders are designed to store three JOSEPH&JOSEPH cutting boards beneath kitchen cabinets. Each holder features a sleek, compact design with…
This is an airfoil of the Rc Timber that has holes in it to Styrofoam cut it.
Best printed in TPU, these feet will keep your cutting boards elevated and dry. The inside holes fit a #6 screw and a #6 washer with a 0.375" (3/8") outside diameter like the one linked below (Amazon Associate Links). A 0.375" OD washer…
Very simple and easy to print small mitre box to cut D-type (in my case) 30x15mm trunking. Printed in Prusament PETG Urban Grey. Easy to screw down on a board for cutting.
I made these two similar models to securely hold cutting oil at my drill press. One is designed to hold Spyder Mach-Goo gel-style cutting fluid and the taller one holds a bottle of Oatey cutting oil. The Oatey holder shown in the photo is…
Small redesign of ICant3DPrint exceptional Improved Mitre Cutting Box . The length is now suited to print on a 20x20cm bed like the Prusa Mk4's. This also decrease print time and filament usage. The model in the pictures is printed with a…
After assembly, press the levers to load the film sheet, then fix it by pressing the upper surface and make a cut with the blade. In order to pull out the cut 4x5 sheet, press the levers again and push it out through the semicircular…
It has tabs to screw it down on a support timber. The cutting slot is set up for a normal handsaw but is not quite wide enough for the ridge on the top of a Tenon saw (but you could rotate the pipe to complete the cut ). There is a…
A simple model that facilitates the holding of soaked, rolled newspapers to practice cutting. It doubles as a water bottle holder as well. You will need some sort of round stake driven into the ground to place it on. The default stake…
Cutting jigs for silicone/pvc tubing with one inch, three-fourths inch, and five-eighths inch OD. Each jig has slots for 30°, 45°, 60°. 90° cutting angles.
Are you like me and when cutting sandpaper on a self healing mat the knife digs in and goes where it wants or it snags and then slips creating a dangerous condition for getting yourself cut, especially with the narrow strips used. I'm new…
This simple tool will help you mark your 25mm tubular steel for cutting. I added a slot for a small 4x2mm magnet to assist the tool in holding the measurement in place. Since I only use an angle grinder to cut my steel, this helped me…
Cutting depth limiter for knives This practical model can be used to limit the cutting depth of knives, making it easy to cut into barbecue sausages. The cutting depth is always 3 mm, so that cutting is precise, quick and easy. All cuts…
03.06.26: Reed Template for Great Highland Bagpipes added.
molde de cortes para ceramica | cutting mold for ceramics
This is a template for making holes for 92mm and 124mm fans. The inner side is for 92mm fans and the outer side is for 124mm fans. The template is used to mark the place we want to cut out. Personally, I use it to cut holes in industrial…
This is a template for making holes for 177mm and 224mm fans. The inner side is for 177mm fans and the outer side is for 224mm fans. The template is used to mark the place we want to cut out. Personally, I use it to cut holes in…
