Scalable Mark Rober Compliant Dart Gun (with .dxf for laser cutting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix of Mark Rober's compliant Nerf gun is easily scalable, and you can also laser cut it.
- Rating
- 4 / 5
- Likes
- 13
- Downloads
- 403
- Makes
- 5
- Views
- 1,572
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
This is an easily scalable version of Mark Rober's compliant Nerf gun. The main reason for this is that it is flat, so it scales way easier than a version with facets. This means you can also laser cut it! The default scale is fullsize with 10mm thick dart gun, and 5mm thick darts, but I included the .step file so you can modify it to your needs. I haven't fully tested the scaling, but it should be able to scale down pretty far. Comment how scaled down you were able to print/cut it!
If you want to scale it down a lot, then you will want to try to print with the smallest nozzle size, with the smallest layer heights and widths you can go. If you only have a .4 mm nozzle, then you can go 20% scale with .1mm layer heights and .26mm layer widths, with even smaller scaling when you use smaller nozzles.
