Scalable Mark Rober Compliant Dart Gun (with .dxf for laser cutting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix of Mark Rober's compliant Nerf gun is easily scalable, and you can also laser cut it.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 401
- Wydruki
- 5
- Wyświetlenia
- 1566
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is an easily scalable version of Mark Rober's compliant Nerf gun. The main reason for this is that it is flat, so it scales way easier than a version with facets. This means you can also laser cut it! The default scale is fullsize with 10mm thick dart gun, and 5mm thick darts, but I included the .step file so you can modify it to your needs. I haven't fully tested the scaling, but it should be able to scale down pretty far. Comment how scaled down you were able to print/cut it!
If you want to scale it down a lot, then you will want to try to print with the smallest nozzle size, with the smallest layer heights and widths you can go. If you only have a .4 mm nozzle, then you can go 20% scale with .1mm layer heights and .26mm layer widths, with even smaller scaling when you use smaller nozzles.
