Cameo Silhouette Pro - feeder roller (fix for mat-less cutting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for Cameo middle feeder rollers to support vinyl matless cutting
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 320
- Makes
- 2
- Views
- 2,402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This part replaces the original Cameo middle feeder rollers, as they're not providing enough pressure to support vinyl rolls and other materials for mat-less cutting.
The problem to be solved
There is a significant gap between the base and center 3 feed rollers during mat-less cutting. It makes vinyl foil roll cutting almost impossible (due to material movement, buckling, …)
In action
You'd need also
- 4mm rod (aluminum or stainless)
- 34mm long for single bearing model
- 39mm long for dual bearing model
- POM bearing 13mm dia, 5mm width, 4mm axle. I used the version with glass balls - or just print them ;-)
- 2x springs 0.4x4x7.5 (alternatively 0.5x4.5x10 if you need more pressure)
The body is printed in dual color with custom supports. For a single color option - join the bodies.
The shaft can be glued to the bearing or fixed by retainer clips (my choice)
Print instructions
- PLA
- 0.6 nozzle
- 3 perimeters
- 100% infill
- Print in vertical orientation
Model is modified for multicolor print. The custom support version is modified for 2 colors and a “soluble” support layer