Cameo Silhouette Pro - feeder roller (fix for mat-less cutting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for Cameo middle feeder rollers to support vinyl matless cutting
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 320
- Wydruki
- 2
- Wyświetlenia
- 2402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This part replaces the original Cameo middle feeder rollers, as they're not providing enough pressure to support vinyl rolls and other materials for mat-less cutting.
The problem to be solved
There is a significant gap between the base and center 3 feed rollers during mat-less cutting. It makes vinyl foil roll cutting almost impossible (due to material movement, buckling, …)
In action
You'd need also
- 4mm rod (aluminum or stainless)
- 34mm long for single bearing model
- 39mm long for dual bearing model
- POM bearing 13mm dia, 5mm width, 4mm axle. I used the version with glass balls - or just print them ;-)
- 2x springs 0.4x4x7.5 (alternatively 0.5x4.5x10 if you need more pressure)
The body is printed in dual color with custom supports. For a single color option - join the bodies.
The shaft can be glued to the bearing or fixed by retainer clips (my choice)
Print instructions
- PLA
- 0.6 nozzle
- 3 perimeters
- 100% infill
- Print in vertical orientation
Model is modified for multicolor print. The custom support version is modified for 2 colors and a “soluble” support layer