Counting matching models…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
A minimal sized enclosure for SK40 power supply module. Provides protection for desktop lab use. Easily printed in PETG.
Printing tips: Use TPU Decrease printing speed Turn off detect thin walls 15% Gryoid infill 2 walls Concentric top surface on the top edges (Use modifiers) Use holographic plates My experience: I have been using this phone case since…
Keycap compatible with the wireless Logitech k400r keyboard. I split this keycap into two parts so the connector can be printed lying down because otherwise it wants to catch on the keyboard forcing the user to press in the center of the…
Wanna put your keyboard on your radiator? Print two of these and do it! If you like my work, consider buying me a coffee: https://ko-fi.com/maildannesholkse
Logitech K400, shock protector case. Material: 4 - M3 6mm or 8mm 4 - M3 nuts 2 - TPU corner protectors (protectorTop) 2 - TPU corner protectors (protectorBT) 2 - TPU connecting straps (union) 1 - PLA Case Right (case-Right) 2 - PLA Case…
Logitech K400 Keyboardholder for Aluminumprofile Simrigs A simple Holder to store my Logitech K400 on my Simrig while the Keyboard is not beeing used Print Settings: 7% Infill 2 Perimeters printed in PLA Hardware needed: 2x M8 T-Slot Nuts…
This is an exhaust adapter for k40 laser driver for design: To be fully printable on the bed of Ender 3 (23x23 cm) 80 mm tube outlet size Compact, have to replace the original fan, using only the inner screws (an in line fan will be…
A small add-on for your Cloudray nozzle. The purpose of the add-on is to reduce the nozzle diameter from 3mm to 1mm. This allows pumps or compressors with a lower flow rate to keep the flow more constant. In addition, by extending the…
A simple foot for your K40 and all sort of other machinery. The foot has a height of 30 mm. For assembly you will need: 6x35 mm hex bolt (1 pc) 6 mm nut (1 pc) 6 mm washer (1 pc) If you like this design, please post your print with a…
This is a case for the K400 keyboard from Logitech. Now you will not have your keyboard on your lap or on the floor anymore. It fits on every 8020 aluminium sim rigs. Feel free to ask me anything! My IG account is @mighty3dprints, feel…
I designed these 5 components for the 5 gallon bucket I used as a water reservoir for my K40 laser. I wanted a way to get a good seal so the dust form other tools such as my CNC router do not contaminate the water. The holes for the water…
Adapter plate for my K40's original mirror mounting holes and the CloudRay laser head and mirror kit ( https://www.amazon.com/dp/B07NXQ7SVK )
I made this so to help with K40 mirror alignement with a Sightmark 40S&W laser boresight (https://www.amazon.com/Sightmark-380-ACP-Pistol-Boresight/dp/B001C3Q9BI ) with the Cloudray Laser Head ( https://www.amazon.com/dp/B07NXQ7SVK ).
Easily use paper targets to align mirros on Cloudray laser head and mirror assembly ( https://www.amazon.com/dp/B07NXQ7SVK ). It's made in two parts that sandwich the paper inbetween, this allows for accurate centering of the paper target…
Improved version of https://www.printables.com/model/603448-k40-camera-mount-for-document-scanner more magnets and attachment to the corner of the K40 resulting in less flex from the fairly thin metal. Designed this camera mount for a…
I was not able to print the fume extractor adapter I designed on my 220x220 printer so split into 3 parts. Juuuuust fits on build plate. Doesn't need glue, but it couldn't hurt either. For 4" vent hose. Printed in PETG 15% gyroid infill 3…
I made huge cleanup of K40 laser. I need to adjust laser path after that and I'd like to use a safe laser pointer for such work before I load 40W of laser power into it. So I designed these little disks for holding small laser pointer in…
Steam Ak400 / Ak420 Pro Canopy Auto + Manual tree support,brim are REQUIRED
Mounts for table for K40 CO2 chinese laser. I used it to attach aluminium plate to the laser chasis. For connecting together you will need M6 screws and nuts and M4 screws for connecting aluminium plate and holders. Slovak: Uchytky pre…
OpenMower YardForce SA/SC/NX Speaker Box for Visaton K40SQ for use with DFPlayer Mini. Print with PETG 0.2+ Layer Height
Edit 11-02-2021: Added the Fusion360 file since I don't have this laser anymore. This is an adjustable bed for the K40 laser cutter The stepper controller works on 5 volts Here is a list of parts; -Belt 1250mm long 6mm wide…
Can be mounted on either side of a wooden partition and against a wall. Uses m4 bolts and nuts for partition mounting. Using washers recommended. The holes are designed to be printed with a 0.6 nozzle and a 0.3 layer height. Mounts the…
The small style turbine blower fans snap into the side of this housing. There is a version for a left side fan mount and a right side fan mount. I think the best is the left side mount because if you exhaust fan is in the back like most…
SCALE TO 1000% when using obj files Could not find any middle buttons for the K400 plus so i made my own the STEP file and the STL/OBJ is attached, feel free to alter how you want I have pre made some of the most common apps but you will…
I picked up a cheap K40 laser and it came with casters...but I didn't like that because it's about the same size as my table and I wanted it to stay on the table not roll off. So I whipped up some replacement feet instead. The foot can be…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
Exhaust port for the Monport K40 Pro CO2 laser that uses the factory fan and bolts into the factory location. This turns the outlet 90 degrees and keeps the tubing tucked up close to the back of the machine. I've included the .stl, .step,…
Für das K40 Gehäuse mit 210x110mm Öffnung. Anschluss 100mm Schlauch mit externen Inline Ventilator zur Besseren Absaugung und da der Originale nicht mit dem K40 Gantry vom K40 Keller zusammen passt. Material spielt keine Rolle ich hab…
STEAM AK420 / AK400 Tail Linkage / Control Guide
Logitech Keyboard support K400+ remix/inspired in Jackie Daytona model. I removed the holes and make an extrusion to adapt at the side of my table. Fixed with a double sided tape. Added also the model without the extrusion for those who…
This is a work in progress, but a couple people wanted it so here it is! I also don't know what I'm doing so my model is probably terrible. You only need to use supports for the posts that stick out of the right half of the tray and the…
easy to print / one piece Air assist nozzle for most K40-Lasers. It's the updated version with a normal 12V blower. So there is no hose in the air. break away supports included ;-) Print Settings Printer: Upgraded Geeetech i3 c Rafts:…
For some reason, my camera will calibrate but doesn't hold the settings. I created this to slip over the stock lens to give an idea of where my cuts are contained. Works really well.
This is a Hose connector for the K40 Laser Cutter to replace the out of the box fan with an external fan or air filter system. It is attached to the standard bolt holes in the backside of the K40. See the pictures ;)
Small Logitech K400 mount that swivels, tilts, and has a quick release for the keyboard. The quick release is like a worse version of the dovetail quick release system found on some tripods. I made this specifically to clamp to a piece of…
Remixed this model to be used with smaller aluminum extrusions. I cut it in half'ish, added holes to be used with M8x16 flat head screws.
Wandhalter für die Aufnahme von MK4 (morsekegel 4) Wall bracket for holding MK4 (morse taper 4)
Mounts with 3.5mm countersunk woodscrews. Four screws may be a bit overkill, but atleast it's solid! Fits both k400 and k400+ keyboards.
This are stackables Insert Boxes for the Eurobehälter /Eurobox TK400 and TK600 /75 /145 etc. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none Comments printed…
This remixes the swivel sim rig keyboard mount found on Thingiverse by basically reversing it so instead of the bracket mounting on the under side, it mounts over the entire top side. It covers the track pad and gives you a small mouse…
Mounting aid for cutter holders with a SK40 cone. The mounting aid holds the tool holder firmly and securely while the tool can be fixed in the holder. Version v0-1 is without reinforcement in the "sliding blocks" and version v0-2 is with…
Remix made to keep keyboard in holder when mounting vertically
Exhaust port for K40 Laser with the 90mm fan to remove the ridiculous blue metall one. Simply remove all the screws from the backside and undo the four screws on the fan so they are flush with the inside. The screws go direct into the…
I use the Logitech K400 Plus with my indoor bike trainer, and I hate the touch pad - particularly the scroll functionality. This slides over the touch pad and gives you somewhere to use a regular mouse. It also has a fence at the bottom…
Alignment tool for K40 mirror No need more for putting tape over the mirror and risking getting the mirror dirty. You can fire a couple of pulses, simply move the strip over a little bit to get a fresh piece of paper. Three versions:…
K40 exhaust adapter for K40 laser with the 90mm fan to connect the original blue hose. Printed angled on the print bed to reduce supports. If there is a need for other hose diameter, let me know. - - - - Winkelanschluss für den K40 Laser…
Additionally required parts: 12 mm AR coated ZnSe lens (focal length min. 30 mm, max. 100 mm) Metal washer (OD 16 mm, ID roughly 9 mm) and superglue OR sticky aluminium tape Description: This is a two piece printable focus lens mount…
I permanently installed my K400, but don't ride around with an antenna permanently installed. I wanted something to put in place to keep rain, dirt, and other detritus out of the threaded mount hole. This cap prints as 2 parts and…
I could not find what I needed so I made it this is everything you need to mount air assist with drag chain, endstop upgrade homing left rear, and a beam combiner to a k40 laser. Endstop/beam combiner mount is a modified from…
Logitech K400+ Battery Cover The cover of the K400 plus and non-plus are different and I couldn't find any models for this specific one. Seemed like a good beginner FreeCAD project, then I realized this thing has literally just one…
I printed it with a 0.25 mm nozzle. I didn't try it with other nozzles. For mirror brackets with 6 mm hole spacing. Material: 2x –> M2 x 10 1x –> M4 x 8 up to M4 x 20 (All screw lengths in between are possible) Assembly: Print…
Simple clamps that mount directly to the gantry of your K40 CO2 laser. Includes spacers for cutting thinner materials.
With this model you keep your swivel in the normal orientation without the need for offset hinges. This way you can mount other stuff without needing to adapt everything for another angles.
Holder for a K400 keyboard. It's designed to fit on a Next Level F-GT Lite simracing seat with a rod that fits into the height adjustment holes. add some glue But I've included a rodless version that can fit on any 14mm tube. It comes…
A lot of the K40 laser cutters sold on ebay are bluff packages. They contains a 600mm laser tube never able to provide the promised 40W laser power. 600mm tubes have a nominal power of 20W and a peak power between 25-35W. They are higly…
Inspired by the adjustable Z-bed by brianvanh I wanted to have one which can be adjusted motorized controlled by the upgraded smoothieboard in the cutter. The realized bed can move its surface up to 30mm below the lasers focus. Beside the…
The laser power knob on my Omtech K40+ can be moved very easily, just by brushing a hand. This is obviously pretty bad for multiple reasons. This cover will fit over the top of the unit (which has "ZYE Laser" on the display) and prevent…
Uses M4 x 16 mm screws threaded into printed “nuts”, which fit in the 8mm x 60mm slots in the wheel deck.Uses M4 x 16 mm screws threaded into printed “nuts”, which fit in the 8mm x 60mm slots in the wheel deck. It's a tight fit, might…
This is a sturdy and practical bracket designed to hold a Logitech K400 wireless keyboard. It’s perfect for simulator cockpits, workbenches, or any setup using 4040 aluminum profiles . The bracket can be screwed directly onto a 4040…
The acrylic Focus is annoying to use because it's too thin, so I made a better one. I was dissapointed that the included k40+ bed didn't align with the origin, so I made brackets to move the endstops outward, and a block for holding the…
Mount for the Kulp Lights K40. I use #4 3/8" screws. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Other
This is a simple, parametric gauge block to set laser focusing distance for cutting and engraving material on CO2 lasers. It supports material thicknesses from 0mm (for engraving) to 6mm (~¼"), with each height labeled on the block. the…
I liked the original author's model but I wanted to change it to allow: Printing with a skirt/brim to allow printing in ASA or ABS. To use the existing mounting holes to bolt onto the enclosure. Change some of the mounting holes to allow…
These are adapter pieces for the LOGOCLIC®-brand classic skirting board K40 https://www.logoclic.info/en/accessories/laminate-skirtings/classic-skirting-boards/skirting-board-k40 Because of the high price and low availability of color…
A simple and sturdy holder designed to mount a Logitech K400 or K400+ keyboard to the side of a Trakracer TR160, or any other sim rig using 40-series aluminium extrusion profile. Hardware Required : 4x M6 Bolts (12mm to 16mm length is…
Used Arctic Z1 Basic monitor arm. Used included spacers and M5 bolts.
I needed a way to get the Sensor of the case to not heat it with the Power Brick and the ESP32 inside. Also i wanted to hide the cables. I got the Case in my lokal Hardware store but the diameter of the "Plug" with 16mm diameter probably…
Adaptor to fit 3" dryer vent hose to Omtec K40 laser. Probably fits most other K40 lasers. Prints with a very tight fit, will probably need a little sanding to fit, but it'll be tight enough to not need a clamp. The hose will need a clamp…
Update as of February6, 2022: Added a protection ring to keep the axle in place and to prevent flap from touching the exhaust tube. Flapdesign adjusted for clearance. See last picture. This is a simple to print and assemble check valve…
When using the Cloudray mirror and laserhead set, the nozzle of the head can run into the protection baffle for the Y-axis motorshaft. This simple clipon spacer prevents the head from running into the baffle. Just put it between the…
This is actually not a remix but an add on for the K40 cloudray head mount with and without chainmount. It works well for a focal distance of 50.8mm and the assembly does not interfere with any inner machine parts. OpenSCAD file included…
This is a sketch for an Arduino Nano to integrate control motorized bed https://www.thingiverse.com/thing:4066979 flowmeter YF-B7 with integrated temperature probe display everything on a I2C 0.96 OLED SSD1306 display Circuit diagram is…
I received the updated Version of the K40 Laser (Vevor type with digital reading, emergency stop, light). It also had a new exhaust fan assembly, which is screwed directly to the exhaust duct. To fit the motorized lasertable…
Mix and match for your tube size. Included is a 4mm attachment for most coiled air hoses. Suggest super gluing each part from below once seated (bit of Bicarb soda will set it up immediately). Don't put any glue on the inside, we don't…
Deutsch Allgemeines Für die meisten Lampen sind 3 Dateien hinterlegt um unterschiedliche Lampenpositionen zu realisieren. Falls bei einem Modell eine Version fehlen sollte, ist dieses konstruktiv nicht umsetzbar. xxx_90 degree_single_head…
I own a very cheap k40 and the mirror are really basic. I designed these to avoid burning tape glue close to mirror and mess them in the calibration process. This are designed for mirror 2 and 3 ( I didn't have a needs for mirror 1). And…
After we made the modular morse taper drill rack we have made a similar solution for our SK40 taper milling tools. There are versions with interlocks on 2 sides and on 4 sides to arrange as needed. If other arrangements are needed the…
Simple belt tensioner that uses two flanged 623zz bearings. Category: Parts
A minimal sized enclosure for SK40 power supply module. Provides protection for desktop lab use. Easily printed in PETG.
Quick and dirty remix of Pista01's K40 vent to accommodate a 3 inch pipe into an inline blower. Also added similar slotted mounting holes to JMcAz7 version, as the quality control on these things is great, isn't it? :) The fit is a little…
This is the Ultimate upgrade for your K40 laser cutter. Increasing the cutting area almost by 2 and making laser alignment much easier. More details about this build http://www.openbuilds.com/builds/uk40ob.3988/ And dont forget to give…
Printing tips: Use TPU Decrease printing speed Turn off detect thin walls 15% Gryoid infill 2 walls Concentric top surface on the top edges (Use modifiers) Use holographic plates My experience: I have been using this phone case since…
Keycap compatible with the wireless Logitech k400r keyboard. I split this keycap into two parts so the connector can be printed lying down because otherwise it wants to catch on the keyboard forcing the user to press in the center of the…
When printing, use a high temp filament like Heat Treated Carbon Fiber Proto-Pasta
Wanna put your keyboard on your radiator? Print two of these and do it! If you like my work, consider buying me a coffee: https://ko-fi.com/maildannesholkse
Adapter to remove the 80mm fan from the VEVOR K40 laser cutter, for using an external inline fan.
Logitech K400, shock protector case. Material: 4 - M3 6mm or 8mm 4 - M3 nuts 2 - TPU corner protectors (protectorTop) 2 - TPU corner protectors (protectorBT) 2 - TPU connecting straps (union) 1 - PLA Case Right (case-Right) 2 - PLA Case…
Logitech K400 Keyboardholder for Aluminumprofile Simrigs A simple Holder to store my Logitech K400 on my Simrig while the Keyboard is not beeing used Print Settings: 7% Infill 2 Perimeters printed in PLA Hardware needed: 2x M8 T-Slot Nuts…
This model can be used as a replacement for either the mute or volume up button on the Logitech K400+ (K400plus) keyboard. I works well enough though the retaining clips could be stronger but I can't be bothered to make an updated version…
A simple keyboard holder for the infamous Logitech K400 Plus, better known as the "Sim Racing Keyboard" because of it's trackpad, and wireless design. This holder is made for sim seats to be hung onto a side handle in the seat. INFO: -…
I didn't find something I liked, so I designed this. I designed the transition from rectangular to circular long enough that any printer should have no trouble printing the slope without supports. I printed in PETG with 25% infill and 5…
Logitech K400+ Battery Cover with Dongle Case The cover is for the Logitech K400 plus. This is a remix modified easily with Tinkered to add a dongle case or slot to store the usb receiver. Print instructions This is meant to be printed…
Two part holder for the Logitech K400+ keyboard. *estimated total print time and material usage (P1S, 0,22mm layers, PLA, 3perimeters): 1h16m, +-60g
A Logitech K400 stand that clips on to raise your keyboard. Originally intended to clear Digico SD9 faders.
