Upgraded blower housing for K40 Laser Cutter/Engraver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of Joe's original housing. This version is for a different motor and mounting option.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I liked the original author's model but I wanted to change it to allow:
- Printing with a skirt/brim to allow printing in ASA or ABS.
- To use the existing mounting holes to bolt onto the enclosure.
- Change some of the mounting holes to allow a different style of motor (used in my blower).
- A larger top cage to keep all the wiring and capacitor tidy inside.
Please refer to the changelog for details.
The model is compatible with the 4-Inch & 3-inch adapters used in Joe's model (and included here for completeness). The new model should be backwards compatible with the original (however I've not checked, so your experience may vary!). The idea is to make the model compatible with the different style of motors. Check the dimensions of your motor to see which version of “top.3mf” matches your motor:
- k40_01-11-2025-top.3mf = Motor with mounting tabs
- Joe's top.stl = Motor mounted without tabs (see original model).
Use the same fasteners as per the original model plus four M5 nuts and bolts to allow mouting (see picture). General assembly is the same except the K40 itself needs a slight change. The “L” shaped sheet metal “lip” at the bottom needs to be removed (see photograph). This is easily broken off, just break the spot welds holding it on.
I have modelled everything in FreeCAD and I have attached the design for those who are interested.