Spacer for K40 Laser and Cloudray Mirrorset
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When using the Cloudray mirror and laserhead set, the nozzle of the head can run into the protection baffle for the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
When using the Cloudray mirror and laserhead set, the nozzle of the head can run into the protection baffle for the Y-axis motorshaft.
This simple clipon spacer prevents the head from running into the baffle. Just put it between the rubber bumper and the plastic piece of conduit,which originally is used as the hard stop.
OpenSCAD attached as usual for easy adaption.
Enjoy!
Cheers
Armin
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Noyes PLA white
Category: DIY