K40 laser engraver vent to 4" adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't find something I liked, so I designed this. I designed the transition from rectangular to circular long…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 65
- Makes
- 0
- Views
- 358
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I didn't find something I liked, so I designed this. I designed the transition from rectangular to circular long enough that any printer should have no trouble printing the slope without supports. I printed in PETG with 25% infill and 5 perimeters, but that's probably overkill. This print just barely fits on a 250mm long print bed, but no problem on x and z. The result slips nicely into place on my laser and doesn't leave any obvious gaps. It's slightly asymmetrical top to bottom as on my laser it's a 35mm distance from the bottom ledge to the bottom of the opening on the back of the machine.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Filament: Esun PETG
Category: Parts