Raspberry Pi 4 VESA 200 Ice Tower Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of my original Raspberry Pi 3 bracket. This bracket allows you to mount a Raspberry Pi 4 onto a TV or…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of my original Raspberry Pi 3 bracket.
This bracket allows you to mount a Raspberry Pi 4 onto a TV or Monitor while retaining the ability to use the VESA mounting. This TV mounting part of the bracket is 2.4mm thick which is the same as the washers that came with my wall mount for the TV.
This version of the bracket has been raised up slightly to allow the use of the included mounting hardware of the Ice Tower cooler
The mount uses the four M2.5x6+6mm standoffs to attach the Pi to the bracket, then attach the Ice Tower cooler to the standoffs using the M2.5x6mm screws that also come included.
The mount has a clearance of 8mm for the VESA screws to go through.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
No
Supports:
No
0.15
Infill:
20%
Category: Electronics