Fritzbox to Vigor Adapter Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter plate to mount the vigor to the wall and use the fritzbox wall holes. Tested with Vigor 130 and 160 Serie
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A while back, I upgraded the networking setup in my loft, replacing the old Fritzbox with a Vigor router, OPNSense firewall, HPE Aruba switch, and a few OpenWRT access points. However, I kept the old Fritzbox as a backup.
Recently, I decided to remove the Fritzbox entirely and mount the Vigor on the wall instead. To avoid drilling new holes and having to patch up the old ones, I created a simple mounting plate that reuses the existing Fritzbox holes.
This mounting plate is designed to be compatible with any equipment where the original holes are 197 mm apart, and the new device's mounting holes are 140 mm apart. Tested with Vigor 130 and Vigor 160 Series
I printed it with 45% infill and 4 walls—no support was needed.