1 / 4
Roomba i2 Bumper extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roomba i2 bumper extension clip
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 550
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (19)Powiązane
Small parts to glue to the unique front bumper's curve on a Roomba i2 robot vacuum.
I was having issues with it getting stuck under several pieces of furniture so I created some small parts that can be glued onto the front bumper. I used CA glue to attach each clip.
2 was probably enough…but it looks kinda wild with 6 so there it is :)
Method:
- I used an old piece of PETG filament and got it soft using a torch then laid it onto the bumper. (white filament photo)
- Then I traced the inside of that curve onto a paper using a marker and now I had a big “black shape” to approximate the bumper.
- Imported the “black shape” into Tinkercad (after converting it to an SVG)
- Used the “Black shape” as a "hole" in Tinkercad and then just kinda made some shapes based on what I thought looked about right.
PS. I used a flame to soften the lower part to make sure it had a very flat surface for the glue. I printed using PETG and a 1mm nozzle on an old stock CR-10.