Sick skeleton guitar wall stand (IMPROVED!!!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sick ass guitar wall stand with three 5mm diameter screws
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This is the first version of a guitar wall stand I've made.
UPDATE 1: I realized that it might need only a bit more distance to the wall for some guitars (specially acoustic guitars) so i added a base as a separate object so that it doesn't add to much pressure to the PLA by passing the screws through it. Its 20mm thick because i think that is the optimal distance from the guitar to the wall.
UPDATE 2: During this testing time i realized that the heat of the environment was slightly bending the holder, i decided to increase its diameter and i believe that with a 60-80% of tri-hexagon infill it should last for a lifetime.
DETAILS:
It uses 3 screws of 5mm in diameter and holds guitars that have a neck wider that 52mm.
You need supports and I recommend printing it with the top side oriented on the bed of the printer in order to favor the line resistances.
I don't recommend printing it with black filament nor leaving it on the sun because it will start deforming
Make me know if I need to make any changes!
I'm considering dividing it into two pieces in order to put a screw in the middle and make it stronger but it might be unnecessary.