Sick skeleton guitar wall stand (IMPROVED!!!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sick ass guitar wall stand with three 5mm diameter screws
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is the first version of a guitar wall stand I've made.
UPDATE 1: I realized that it might need only a bit more distance to the wall for some guitars (specially acoustic guitars) so i added a base as a separate object so that it doesn't add to much pressure to the PLA by passing the screws through it. Its 20mm thick because i think that is the optimal distance from the guitar to the wall.
UPDATE 2: During this testing time i realized that the heat of the environment was slightly bending the holder, i decided to increase its diameter and i believe that with a 60-80% of tri-hexagon infill it should last for a lifetime.
DETAILS:
It uses 3 screws of 5mm in diameter and holds guitars that have a neck wider that 52mm.
You need supports and I recommend printing it with the top side oriented on the bed of the printer in order to favor the line resistances.
I don't recommend printing it with black filament nor leaving it on the sun because it will start deforming
Make me know if I need to make any changes!
I'm considering dividing it into two pieces in order to put a screw in the middle and make it stronger but it might be unnecessary.