Breaking Bad Ray Gun Olympics Meme
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Breaking Bad Ray Gun Olympics Meme HueForge
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 179x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grass Green Transmission Distance: 3
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.64mm) swap to Grass Green
At layer #9 (0.88mm) swap to Grass Green
At layer #15 (1.36mm) swap to Pure Yellow
At layer #23 (2mm) swap to White for the rest.