Liczymy pasujące modele…
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
Ich habe mir auf Amazon einen kleinen Mülleimer fürs Badezimmer gekauft, den man an der Wand befestigen kann. Der Deckel öffnet sich mit einer Feder, wenn man einen Hebel herunterdrückt. Leider war die Arretierungsnase, die den Deckel…
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the…
Cute Cat Hair Clip or Badge I wanted to create a accessory for a child to wear, and really fast and cheap to print. If you choose to use the clip is easy to open and close, with a small catch to secure. Only need to clamp a small amount…
Badminton Stringing Machine Side Support need M8 bolt without head
Regretevator - badge, keychain, 3-5 color NO AMS
A simple Star Wars Galactic Republic logo badge, about 8.5 cm. Enjoy
Layers: BLUE (or BASE+BLUE) + RED + YELLOW + WHITE Drill the hole using slicer where you want.
Modification of badge holder received at my work. My ID kept falling out, so I redesigned it with grooved notches at the bottom so that the ID has to be forcibly lifted (with low force) out of the holder and can't fall out accidentally.…
One of many models available only. To be easier to print, I included some sort of support in the model. Do not enable support in the slicer, you can take an hobby knife to clean it easily. Even if it looks fragile, I'm using it everyday…
Badminton rackets hanger (racquets holder) 3-5 racket slots This can be wall mounted with two screws or use double side tape with no hole version. (I use double side tape with no hole version and it strong enough to hole the rackets) Can…
These keys can be inserted in the lock hole and help you identify the drives, as well as twist to unlock Print the pegs separately, then add a drip of superglue and insert into the key, if it does not fit simply sand the edges a little.…
I work at a place that requires an ID badge for entry and for accessing computer systems. I kept having to replace my badge due to the RFID tag getting damaged, so I designed this badge holder which protects the RFID tag. PETG is my…
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
By popular demand, I have recreated the badge from the front fender of the KE Ford Laser TX3. A faithful recreation for your restoration project, or cool paper weight.
Model of the badge from a Ford laser TX3. Recreated using the original badge so it is a faithful to the original as I could make it. Perfect for the final touch to your restoration project, or just a cool thing to hang on your wall.
No special settings are needed, I printed in silk PLA (silver) and this badge / emblem is used on a tool box as decoration.
I'm restoring a BX-3 and the plastic front logo badge was missing, so I made a replacement based on photos I could find. Maybe this will help someone else someday... Thanks to https://www.thingiverse.com/thing:6231327 for the original…
This is an enclosure system for an arm or wrist wearable sunlight readable e-paper display microcontroller that you can program for whatever purpose you might have. It is based on the Pimoroni Badger 2040W. I started with Andreas's…
This is a magnetic badge holder, where one magnet goes on your belt, the other on a badge holder. This one was designed for 20x5mm magnets and a 1.5in belt. Print 2 of the badge magnet halves. Use superglue to attach all parts together.…
Fue diseñado en orca slicer, pero lo puedes modificar según tus necesidades, este archivo sencillo te permitirá ver los acabados superiores que puede realizar tu laminador y diagnosticarlo para mejorar su uso o detectar fallas en ciertos…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This is a model based off the illustration found on the Snow Leaf Badge found in the Evolving Skies Set. It comes in one version for use with AMS Units, and another that is assemblable for Single Extruder Printers. The body named…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Badminton shuttlecock dispenser with top and bottom closure caps 4 M4 x 20 mm countersunk screws + 4 bolts Recycled from an old feather shuttlecock cardboard tube For a 35 mm square post Printed in PETG
Opel Lightning Bolt in a Kia sized badge. Files are sized for a 2014 Kia Optima hood badge. Resize to fit your needs based on the height.
An T/A replacement badge for Dodge Challenger. Best to print in ASA if you plan on mounting to your car with 100% infill and 0.12 layer height or smaller to make them as smooth as possible.
3D printable topographic miniature of Bad Honnef Capture the beauty of Bad Honnef 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.642, 7.223 (LatLng) . It is…
An easy print of a Badass gnome with axe For best results: 0.12 layer hight, 3 walls, supports on
On a round display base stand the three little pig siblings each with a jaunty cap and shirt, striking playful poses. While looming behind them is the Big Bad Wolf, claws raised and jaw agape, ready to “huff and puff” at their houses.…
A minimalist badge for your first aid kit — designed with four convenient holes for easy sewing, so you can attach it firmly wherever you need it.
Simple logo for the rock band Bad Wolves. Prints easily with standard profiles.
attached are both the STLs for each part and a 3mf file with dovetail cut for no support printing Requires 6 3x2mm magnets.
A supplemental badge that changes the "PRUSA" text on the frame to "PRUSAWIRE" with the Positron logo to the side. There are 2 variants of this available: “ Easy Mode ” - The part is printed as a single piece with an optional filament…
The pins at the back of the badge should be strong enough to poke your bike helmet, you would need to enable supports when you are converting the model to code that is supportable by your 3d printer, otherwise the print would end up…
XXXC Corolla badge for TE72 and KE70 corolla sedans with quad headlight grilles. Uses M6x1.0 bolt.
A 3D printed case for Pimoroni's Badger 2040 W e-ink RP2040 with WiFi badge: https://shop.pimoroni.com/products/badger-2040-w a remix of usedbytes https://www.thingiverse.com/thing:5320100 - compared to his, on mine, the USB port is a…
I wanted a "Don't Panic" badge complementing my Hitchhiker badge. I glued a flat and small magnet and use a second one to fix it in place.
I needed a badge/id clip and holder as the ones my workplace provided weren't all that sturdy since I fidget a lot. (It also doubles as a code scraper for something like Windows Activation keys.) The design is a friction fit without…
Straight from the crypt and into your print bed — this gothic mini-badge brings Halloween style wherever you bring it
Showcase your trophy coyote or badger skull with this unique skull display stand from Song Dawg Designs . This custom model features realistic sand dunes , coyote tracks , and a half-standing fence , simulating the rugged terrain where…
[APOLOGIES TO ALL WHO PREVIOUSLY DOWNLOADED THIS FIGURE] I have now realized that the skeleton pattern on his chest makes for difficult printing and support removal and is prone to failure. So, I have taken a picture of the ribcage and…
Problem Statement: You and a partner have been tasked with choosing and remaking a silhouette within an 18cm x 18cm space. You will have to make a series of offsets to complete the model, make sure to use your partner for feedback and for…
Not the easiest print, there is very little contact with the build plate. Brim recommended (can work without) 0.2mm Layer height 6 walls/perimeters for max strength PLA/PETG
Fender badge styled for a Fox Mustang. Blank area can have text added. Text depth of around 0.5mm works. Ironing is suggested. Model is 3" (76.2mm) wide and 1.5" (38.1mm) tall I used Flashforge Metallic Grey Petg with ironing for the…
Designed in fusion 360. No supports or multicolor unit is needed. For single color printers wanting 2 colors add a pause at layer 11 or 12. Print lying flat on build plate raised text up. Please like, follow, rate and upload your makes.…
Designed in fusion 360. Dimensions are provided in the photos for both files. There is a heavy duty 15mm thick version and a lighter duty 10mm version. Works with fishing line or any line that is 3mm thick or smaller. Use a sawing motion…
A plain, faceless pumpkin badge with small holes for sewing it on clothes. The outlines are painted with a permanent marker, but may be printed with a dual extruder setup, too. The Pumpkin was created with Inkscape as a SVG-file. I…
Description Wall-mounted holder designed for the Bahco BE-9886 screwdriver set (Bahco ERGO handles). It keeps the drivers organized, easy to grab, and makes the set look tidy in a workshop. Not a "front-split" version. Drivers must be…
Badge holder in one piece. Simple design and easy to print Printing time: 36 minutes Easy to place and remove the badge Dimensions: Hight Width Thickness badge 86,6 mm / 3,38 inch 54,8 mm / 2,12 inch 2 mm / 0,07 inch piece 104,6 mm / 4,09…
A robust, all round, everything covering, case for the at 39c3 sold cdc badge nametag. Print 12 Buttons, one top and one bottom shell. Optionally a pin cover. All functionality should still be accessible when the case is assembled. Use M3…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Wall art plaque inspired by the “Heisenberg” character from Breaking Bad, in a…
The HBADA E3 Pro Office / Gaming chair is known for his excessive height of the 6D-armrest. With the standard armrest, it's impossible to have a comfortable seat height and still be able to move closer to the desk with the armrests being…
This was designed to hold name badges that are 2 inches tall and 0.14 inches thick and to hang off of a glass partition panel that is 0.4 inches thick.
This is a 3D printable Renault rear emblem badge , designed to replace or customize the rear logo on Renault vehicles. Perfect for restoration projects, custom builds, or replacing missing or damaged badges. The model is optimized for…
A magnetic clip to hold and display your Printables badges. @denisgomez_469657's original file was for (2) 5x3mm magnets, and I just altered slightly to accommodate (2) 6x3mm magnets.
TNG era and Nemesis badges. Also included are the emblems without the backing.
This model was printed with the Creality CFS multicolor system, but it can also be printed by manual changing filaments by layer (designed for easy color changes). i.e. any old bedslinger like an Ender 3 can make this too! It's a 4-color…
Hooks, feet, and rails for a badminton club peg rota board. 19/11/25 V1: Designed the hook around the 4cm tall feet. Assumed the thickness of the sports hall movable wall to be about ~2cm at maximum. Designed peg rails around these pegs .…
breaking bad - jessi pinkman hueforge 3D Print Instructions --------------------- Layer height: 0.020 mm First layer height: 0.200 mm Recommended: Layer loops: 1; Infill: 100% Start with color: #1e6469 Color swap plan: 1. Start with…
The CYUL Apple ][ Floppy EMU case was near perfect — I just wanted to add a colorful Apple badge to the mix. I used Retro Platinium, Candy Apple Red , and Light Blue for the buttons. I don't have light pipes that work yet. (I'll get a…
3D printable topographic miniature of Bad Vilbel - 🇩🇪 Germany Capture the beauty of Bad Vilbel 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.180, 8.738…
The Citadel of Vanguards Armada logo/badge. Printed on my Centauri Carbo in dual color PLA silk or with PLA pro and turns out great, done with Normal support/default and it comes off easily, and looks gorgeous with very little clean up…
Poo Patrol Badge — for our brave neighborhood heroes keeping sidewalks safe from rogue dog poo. Originally created as a joke gift for my good neighbour, who fights against people who don’t clean up after their dogs in the area. Maybe…
Keep your cases with TrekPak divider kits looking clean & organized and make packing up at wrap a breeze. These badges fit into any empty TrekPak divider slot and can be moved around easily as needed for endless customization. For the…
I couldnt find any actual logos that used the holes for the original badge, and none that actual fit in the hole, or any that accounted for the bumpers like bend, so i designed my own and this is what i came up with. designed to be easy…
This will hold an ID Badge and a Yubikey The Yubikey fits securely but can easily be removed by pushing up from bottom. Also has accommodation for a yoke to go through Yubikey. If you prefer a less snug hold on the Yubikey, insert it with…
Badge of the section id symbol for Blue-fall in Phantasy star online. intended to be printed 2x and glued together so you can have both faces Iron'd
Replace the "Z" badge on the front of the HP Z2 Mini G9 with this template. Use Tinkercad or another tool to upload your logo as an SVG, give it some depth (I used 2mm), center it on top of the provided template, and print with a color…
same as my original model just has the logo to print multicolor you have to paint it which isnt hard, it prints flat so no supports or ugly overhangs, when painting its hard to tell but there are .01mm (not gonna effect the print) dips to…
Der Haken wurde konstruiert, da das Handtuch immer auf dem Boden aufstand, wodurch es dreckig wurde. Durch die Erhöhung steht es nicht mehr auf dem Boden auf und der Heizkörper kann trotzdem seine volle Leistung bringen.
My partner designs costumes for plays, and when they complete one, they make a doll of one of the characters to commemorate it. One of these characters needed a machete, and there needed to be a way to attach it to the doll. I found this…
Show off and commemorate the love and appreciation 🥰 the Prusa Printables community gives you for your published models, makes, articles, posts or anything else that is liked with one of these custom fan made badges. Each features low…
This is a 3D printable PAX Armata badge inspired by Battlefield 6. The model is designed primarily for visual display and cosplay purposes. The geometry is optimized for multi color printing by switching filaments directly in the slicer.…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
I have no idea about 3D printing Personally printed with with TPU Flex 95A filament with 0.4mm nozzle without any issues. PLA will not work because of the tight tolerance. Also the feel is much worse. NOTE! You need to push quite hard…
Designed on my own time some "Swag" to be used as part of education/ classroom presentations and tradeshows that are done as part of my work. Custom designed badge for play or pretend. Print: 0.25mm Nozzle (For details to stand out) Sunlu…
![Apple ][ + Floppy Emu with Apple Badge Cutout](https://media.printables.com/media/prints/f1c5d791-ab80-47a5-a3c9-1058ac380797/images/12110393_aa0136aa-4188-4bfc-b4f4-5b3c0d25124c_8adda14c-7ec0-44e8-aced-1619e97fdecd/img_7430.jpeg)
