E3D'S Motion System - Physical X & Y Endstops.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fill the void that is stall-detection endstops with something tangible.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 940
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Fill the void that is stall-detection endstops with something tangible. Built around the Omron D2HW-C201H Microswitch, the same one used in the ToolHead, and designed as a physical upgrade for your Motion System.
The wires from the two Endstops are stretched between the X bracket and a cable anchor at the back of the system.
You'll need the microswitches, some wire, a few T-Nuts and M6 10mm Button Head Screws.
For loads of other different filaments, 3D printing parts, components and world-leading Hotends visit | https://e3d-online.com
Please help support my work here on Thingiverse and on Instructables by using the affiliate links when making purchases. It doesn't cost you anything extra. Thanks :)
eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk
Print instructions
Category: 3D Printer Accessories