P
PrintablesE3D
Toolhead - E3D Toolchanger
Please refer to our Toolchanger Github for more information.
- Pobrania
- 148
- Polubienia
- 33
- Ocena
- 0
Wyniki wyszukiwania: toolchanger
Liczymy pasujące modele…
P
Printablesp3t3rp4nd4
E3D ToolChanger Simplify3D Model
I made a model to add to Simplify3D which visualize the printbed and the bracket from the E3D Tool Changer. It has no function, but looks nice. If you want to add the model, just got to Tools -> Options -> Machine -> Printer Models and…
- Pobrania
- 63
- Polubienia
- 1
- Ocena
- 0
P
Printablesp3t3rp4nd4
E3D ToolChanger - Simple Raspberry Pi Zero Camera Mount
I made a really simple mount for the original Raspberry Pi Zero case. I cut a bigger hole into original cover to fit the wide angle camera and used some glue to fix it in there. Into the backside of the case i drilled two holes for M3…
- Pobrania
- 51
- Polubienia
- 13
- Ocena
- 5
P
PrintablesOtann
Toolchanger Cable Guide
This simple mod helps you to make your toolchanger cables to point up. This helps them to move freely without entangling with each other. Each section have 3 holes: 4mm for PTFE tube 1.2mm for the metal wire, if you have one 6mm for the…
- Pobrania
- 40
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMichael-3d
ToolChanger -VZbot.basis
Sollte in hochwertigen Materialen mindestens ABS. Hab ihn selber nur in PC CF getestet. Funktioniert wunder bar bei Temperaturen Ü 60° im Bauraum ist die Magnetkraft subotimal deshalb bau ich die nächste Version ohne Magneten für Pla Petg…
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGreg_The_Maker
E3D's ToolChanger - Raspberry Pi Zero Camera Add-On
Designed to replace the Standard ToolChanger Cover , this cover takes a Raspberry Pi Zero and Mini Camera and mounts it to the ToolHead. For extra features install OctoPrint on the Zero! I bought some lenses to try to see if it was…
- Pobrania
- 24
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMYCNC3D
Toolchanger V6 NonPlanar Air Duct
Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles
- Pobrania
- 23
- Polubienia
- 8
- Ocena
- 0
P
Printablesaamott
Compact Toolchanger
See it in action: Cheap 3D Printed Toolchanger Updates will be most regularly published at GrabCad | Compact CoreXY Toolchanger This is rebuild of the Solidoodle 3 with CoreXY Kinematics and a toolchanger based loosely on the E3D…
- Pobrania
- 21
- Polubienia
- 9
- Ocena
- 0
P
PrintablesAdam Voleš
OTC - Orbital ToolChanger ( early prototype )
OTC – Orbital ToolChanger is an experimental 3D printer design featuring a single rotating toolhead with four independent hotends. This system allows multi-material printing without the need for nozzle purging, reducing filament waste and…
- Pobrania
- 7
- Polubienia
- 10
- Ocena
- 0
P
Printables
Lineux DockSlide Toolchanger for Voron Trident
Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…
P
Printables
Maxwell's Razor V1 - 90% Printed Toolchanger
Typical 3D printed gadgets are laden with hyper specific parts that increases the BOM cost significantly. I tried to find a completely mechanical toolchanger and only found over-engineered designs with large BOM's and complex assembly. I…
P
Printables
Mad Max toolchanger carriage 3mm dowels
This model includes the carriage of the Mad Max toolchanger, with 3mm holes instead of 1/8". This makes it easier to source parts. This is a drop-in replacement, so if you decide to use it, you only need to reprint this part. The…
P
Printables
Sovol SV08 Toolchanger Project
After a year and a half the SV08 toolchanger mod has been released. In collaboration with DraftShift design, their Stealthchanger mod for the Voron 2 ( https://github.com/DraftShift/StealthChanger ) has been adapted to the SV08. Due to…
P
Printables
Remix of Toolchanger CEB Backpack Junction Box.
Posted only the back mount, the rest is the same as the original. All credit goes to the original designer, I just needed to move the mount to the side so it would fit next to the Stealthmax. Printed in standard Voron settings, follow the…
P
Printables
2D Mario Wall Art (No AMS or ToolChanger needed)
Full Description This is a multi-part, multi-color wall art piece of Mario designed to be printed as individual color pieces and assembled like a children's puzzle. No AMS or multi-material system is needed. Just print each part in your…
P
Printables
Voron Tophat Back Panel For Toolchangers
Description Custom back panel for use with LDO Stealthchanger Tophat Kit: https://ldomotion.com/products/stealth-changer Also applicable to custom 200mm tall tophats made of 2020 extrusions. Designed for 8 tool setups and active…
P
Printables
Toolchanger LGX Lite + E3D REVO micro toolhead
Total weight of tool: 215g (measured by un-docking tool and placing it on a scale). No PCF mounting as I use side panel mounted fans. This setup is capable of printing 90A TPU without issues (I have not tried anything softer than this)…
P
Printables
Jubilee Toolchanger Extruder assembly for Dragon Hotend using E3D toolplate and Orbiter V1.5 Extruder.
A narrow Orbiter based extruder for the Jubilee Printer using an E3D toolplate. Print using whatever material you like though I use PETG. All parts are oriented as they should be printed. I needed a brim around the cooling nozzle to keep…
P
Printables
Voron 2.4 Draftshift/Toolchanger 350mm Build Extended Full Skirt Bottom Frame
This is an Modded Skirt is for an Voron Draftshift/Toolchanger, with an Extended Y frame of 100mm. And Front 2040 Extrusions. The Front Motors Are Extendet For 2040 Extrusions. Frame Must be Extendet in Y about 100mm Front Motors needs to…
P
Printables
Voron 2.4 Draftshift/Toolchanger Extended Z-Covers, with 2040 Front Extrusions.
Extended Z-Covers For 2040 Extrusions for the Voron Draftshift/Toolchanger Design. Used Screws : M3x8 (10 Pieces) This are Extended Z-Covers for the front of the Draftshift/Toolchanger with 2040 Extrusions. If you only Print the Shorter…
P
Printables
E3D's ToolChanger - Adjustable Cleaning Brush
Add automatic brush height adjustment to your Motion System & ToolChanger ! A motorised adjustable brush for the wiping and cleaning of nozzles during tool changes. If you would like dual adjustable brushes (why wouldn't you?) print a set…
P
Printables
Neptune4Plus | QuickToolChanger H2V2S Remix V2
I redesign & remix again to ditch Elegoo Toolboard and use BTT EBB42 Toolboard. Version 1 files can refer to this link: https://www.printables.com/model/936634-neptune4plus-quicktoolchanger-h2v2s-remix-v1 Step 1 Please print out:…
P
Printables
Smart Orbiter 3 for E3D Toolchanger Mount Without Toolboard
Adapt the Smart Orbiter 3 to the original Duet 2 Toolchanger (no Toolboard). See my separate model made for the version with Toolboard. Uses a 4010 Blower due to space constraints - there are threaded inserts to be put in the baseplate…
P
Printables
Revo Hemera XS tool for Jubilee toolchanger
This is a tool for the Jubilee toolchanger featuring the E3D Revo Hemera XS extruder. I have a V6 Hemera direct drive extruder on my Jubilee printer, but I wanted to try to build a smaller, lighter and quiet Hemera based tool. This tool…
P
Printables
Laser Mount for Proper Printing's Sprite Toolchanger
This is a Creality Laser Module mount for ProperPrinting's sprite toolchanger . I kept switching between laser cutting and 3d printing, and I was getting tired of screwing and unscrewing the extruder. Then I found this sprite toolchanger.…
P
Printables
E3D Toolchanger Dock Cables Remix
The standard part of the E3D toolchanger to route the cables to the tool includes an extension for a bowden tube. On my machine, I use orbiter extruders in a direct drive configuration and route the bowden tube up from behind the machine.…
P
Printables
Jubilee Toolchanger Extruder assembly for Rapido Hotend using E3D toolplate and Orbiter V1.5 Extruder.
Extruder for Jubilee Printer Using Orbiter 1.5 and Rapido hotend based on an E3D toolplate. Will need (8) short Dodge heatserts. (1) 46mm PTFE tube. (4) M3 x 8mm socket heads to mount Orbiter and wiring stanchion. (2) M3 X 8mm countersunk…
P
Printables
2020 spool holder and toolchanger ptfe holder
This spool holder is simple and effective. You can place several spools on a tool changer chassis with it, and it also includes PTFE holders. It was designed with a number of issues in mind: It's designed to be simple. Being able to be…
P
Printables
Lineux DockSlide Toolchanger for Voron Trident
Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…
P
Printables
Toolchanger CEB Backpack Junction Box
This mod allows you to mount the CEB pcb to the back of your printer and hide your CanBus cable management neatly in a pretty box. It goes nicely with another model I've made that allows you to route the cables via the back filter: Voron…
P
Printables
The Cheapest ToolChanger
Chci tento projekt prezentovat jako myšlenku, že stavba toolchangeru je lehká. Můžete se inspirovat mojí nástavbou výměny hlav ze souborů v tomto projektu. Část I. - Hardware Jelikož jsem chtěl postavit co nejjednodušší verzi, rozhodl…
P
Printables
E3D Toolchanger Pitlane with captive nuts
Throughout the build of the E3D Toolchanger I noticed a significant number of parts that rely on tapping into plastic printed parts, in my experience this is a great method when using M5 and above sized threads, but is not very reliable…
P
Printables
Trident Toolchanger Docks for Anthead on Crossbar.
Anthead Crossbar Docks for Madmax Toolchanger These toolhead docks are designed for the Madmax Toolchanger system and are compatible with Voron Trident and similar static gantry printers. The docks mount to a 2020 extrusion oriented in…
P
Printables
E3D ToolChanger X & Y Endstop Mounts
This is a quick Remix of Greg_The_Maker's version, my TC had extrusions without the little step and Greg's mounts didn't fit correctly. These have a 7.8mm wide step that sits perfectly in the extrusions on my toolchanger. Second picture…
P
Printables
Stealthchanger / Toolchanger Voron Design Calibration Cube
Stealthchanger / Toolchanger Voron Design Calibration Cube This is multi parts so you can color them easily.
P
Printables
Stealthchanger / Toolchanger Test Chip
Stealthchanger / Toolchanger test Chip. This is multi parts so you can color them easily. Available in .stl, .obj and .3mf files.
P
Printables
Nozzle Cleaning Brush Holder for MadMax Toolchanger
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Keep your nozzles clean and your tool changes smooth with this dedicated nozzle brush holder,…
P
Printables
Horizontal Dock System for MadMax Toolchanger (Ender 5 / Mercury One.1 Remix)
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Remixed for the Ender 5 / Mercury One.1, this horizontal dock system provides a clean, rigid…
P
Printables
Maxwell's Razor V1 - 90% Printed Toolchanger
Typical 3D printed gadgets are laden with hyper specific parts that increases the BOM cost significantly. I tried to find a completely mechanical toolchanger and only found over-engineered designs with large BOM's and complex assembly. I…
P
Printables
First layer calibration check for toolchangers
a model for first layer check on toolchangers (Prusa XL, Snapmaker U1)
P
Printables
StealthChanger, Toolchanger X end-stop
A simple solution after experiencing a few false triggers during sensorless homing on the X axis. You will need to replace the M3x16mm bolts for M3x25mm
P
Printables
E3D Toolchanger Pitlane with Captive nuts
Pitlane bracket to hold the tools for maintenance
P
Printables
Toolchanger Cable Guide for 5 tools
Remixed Otann's Original model . --update-- Original Author updated model to support 5 tools. so if you have 5 tools, why dont you download original author's new model instead?
P
Printables
E3D Toolchanger DockAdapter for bowden-tube backboard setup - REMIX With holder for runout sensor
Dockadapter for e3d toolchanger modified to use with runout sensor, see my other files for runout sensor
P
Printables
Fysetc CAN Disto Board Toolchanger Backpack Base
All you will need for this are 10 M3 voron standard (M3xD4.6xL4) heat inserts and 10 M3x6-8 screws. I would use button top. ** If you want to use just 4 of each (1 for each corner) instead of using all the holes for inserts and screws,…
P
Printables
Mad Max toolchanger carriage 3mm dowels
This model includes the carriage of the Mad Max toolchanger, with 3mm holes instead of 1/8". This makes it easier to source parts. This is a drop-in replacement, so if you decide to use it, you only need to reprint this part. The…
P
Printables
Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right)
Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right) I wanted to use the standard Dragonburner toolhead on my attempt at a MadMax toolchanger, so I remixed Chirpy's V8 of the Dragonburner toolhead to include the holes for…
P
Printables
A4T ToolChanger Dock "AntChanger"
The Stealthchanger Dock is a bit too complex for my needs and involves an excessive number of parts. I am looking for a simpler, more minimalist, yet reliable docking solution for my A4T ToolHeads. This is still very much a work in…
P
Printables
Prusa XL – Tool-Changer Toolchanger Stresstest Stress Test G-Codes Gcode
These G-code files are service and endurance tests for the Prusa XL toolchanger . They are designed to repeatedly cycle through all toolheads to stress-test the docking system , tool coupling mechanism, and repeatability under controlled…
P
Printables
XOL 3010 Rapido UHF Custom ToolChanger Dock
The Stealthchanger Dock is a bit too complex for my needs and involves an excessive number of parts. I am looking for a simpler, more minimalist, yet reliable docking solution for my XOL ToolHeads. This is still very much a work in…
P
Printables
Sovol SV08 Toolchanger Project
After a year and a half the SV08 toolchanger mod has been released. In collaboration with DraftShift design, their Stealthchanger mod for the Voron 2 ( https://github.com/DraftShift/StealthChanger ) has been adapted to the SV08. Due to…
P
Printables
Remix of Toolchanger CEB Backpack Junction Box.
Posted only the back mount, the rest is the same as the original. All credit goes to the original designer, I just needed to move the mount to the side so it would fit next to the Stealthmax. Printed in standard Voron settings, follow the…
P
Printables
2D Mario Wall Art (No AMS or ToolChanger needed)
Full Description This is a multi-part, multi-color wall art piece of Mario designed to be printed as individual color pieces and assembled like a children's puzzle. No AMS or multi-material system is needed. Just print each part in your…
P
Printables
Voron Tophat Back Panel For Toolchangers
Description Custom back panel for use with LDO Stealthchanger Tophat Kit: https://ldomotion.com/products/stealth-changer Also applicable to custom 200mm tall tophats made of 2020 extrusions. Designed for 8 tool setups and active…
P
Printables
Toolchanger For Prusa Mk3s+
Introducing the first tool changer for the Prusa i3 Mk3s+. This model is to be used with the BIQU Hermit Crab. So far there has never been a way to quickly change extruders or other addons on and off your printer. This model will make…
P
Printables
Orbiter Extruder Mount for E3D Toolchanger
This is my version of a mount for Joe Pomo's excellent Orbiter Extruder. https://www.thingiverse.com/thing:4223085 It is an ADD (Almost Direct Drive) block for mounting the orbiter above the E3D Toolchanger alignment block. It uses the…
P
Printables
Mad-Max Toolchanger Double-Dock
My setup that this was designed for: Ender 5 Plus ( 2020 V-Slot Aluminum Extrusions) with the following major modifications: Zero-G Mercury One.1 Core-XY Motion System Upgrade Project is located on Github Front Mounted MGN12 Rail on…
P
Printables
PRUSAWIRE XL Stealthburner Volcano and VINDX hotend toolchanger
The craziest project of this year. PrusaWIRE XL StealthChanger and Prusa XL VINDX Hotend Toolchanger PrusaWIRE XL StealthChanger is currently under active development. Throughout the design process, numerous concepts and engineering…
P
Printables
7 color rainbow for testing toolchanger/multicolor
A simple rainbow to test a toolchanger or other multicolor system. Import the 3mf into your slicer and set whatever colors you want for the different segments
P
Printables
E3D Toolchanger Hemera Dock Shifted 7mm
I installed Hemeras in my Toolchanger and found that the Tool2 hot end fan and the Tool3 part cooling fan were too close together. Shifted the Tool3 Dock to the right 7mm to give them more airflow when docked. Note: You, of course, need…
P
Printables
E3NG-Toolchanger
Note: This project is currently in Beta. Community testing and feedback are greatly needed. The build guide and BOM have been posted! please visit https://github.com/emna2881/E3NG-Toolchanger . Hotend-Swapping Mechanism: Swaps hotends…
P
Printables
E3D ToolChanger Hemera Mount for Duet 3 Tool Board with Captive Nuts
A simple remix of the TC-V6-DOCK-BRACKET-HEMERA-With-Nuts.stl part that makes room for attaching a Duet 3 tool board. Print the rest of the parts from https://www.thingiverse.com/thing:4786232 , and I'd recommend printing the part cooling…
P
Printables
ToolChanger - Hemera Tool for Duet 3 Tool Board v1.1
A simple remix that adjusts the PCF ducts to accommodate the SOD123 diode that's present on the v1.1 version of the tool boards. Print all of the other parts from the original version: https://www.thingiverse.com/thing:4194982 Category:…
P
Printables
Duet Magnetic Filament Monitor Mount for Hemera ToolChanger Tool Head
Can be used to mount a Duet Magnetic Filament Monitor to an E3D Hemera ToolChanger tool head. The mount is "shimmed" at the top, above the "V6_Receiver_Top" part from the toolhead. You will need to switch to 4x 18mm M3 screws to make room…
P
Printables
Jubilee Adapter for E3D's ToolChanger Hemera Tool
A simple adapter that enables you to use E3D's Hemera ToolChanger tool on a Jubilee 3D printer. Uses the metal tool plate and dock, and raises them up to the appropriate height. There's also a piece sticking out for a Duet 3 ToolBoard…
P
Printables
E3D'S ToolChanger - Hemera Tool using Duet 3 Tool Board
This Thing includes the following parts: Two of the parts (Hemera Dock Bracket and Hemera PCF Duct) from https://www.thingiverse.com/thing:4008778 modified to accommodate a Duet 3 Tool Board on the Hemera tool. My thanks to Greg Holloway…
P
Printables
E3D Toolchanger orbiter v2.0 mount
Sharing my model to mount Orbiter V2.0 direct extruder to work on the E3D Toolchanger. Works with the v6 tool plate. The file is printed in Petg, It hold up very nicely. The base is made to accomodate M3 inserts to mount the extruder.…
P
Printables
Hemera XS mount for E3D ToolChanger
2 different versions of the mount, unmirrored and mirrored. To save as much space as possible I moved the filament lever underneath the receiver, though it doesn't look like it, the filament lever is still quite easily accessible and if…
P
Printables
BondTech LGX ACE - E3D toolchanger tool adapter
E3D ToolChanger adapter for BondTech LGX ACE Copperhead/Mosquito Printhead. I really dislike the way the E3D Hemera tool is designed. Assembly: (assembly video instructions coming soon) you need to print: 1x tc receiver 1x toolplate…
P
Printables
PanelDue 7 inch enclosure for E3D Toolchanger
I made this design because I wanted my 7 inch screen in the middle of my E3D Tool Changer, (most of) current designs are asymmetric. I wanted my screen to be mounted symmetric. With the two feet mounted, you can slide the case onto the…
P
Printables
Tube end cap E3D-Toolchanger
The tube end cap(s) can be used for the spool holders of the E3D Toolchanger. In assembly step 7 - Fitting the spool holders , replace the round bars ø8x90mm with steel or aluminium tubes ø8x1mm - 90mm long. Press the tubes into the…
P
Printables
E3D Toolchanger Omniadrop mount
This includes all printed parts that are needed for the Omniadrop V2.1 HEMERA (thin) to fit the E3D toolchanger. I RECOMMEND USING STRONG MATERIALS (PCTG, ABS, PETG, PC). I had the “Omniadrop Hemera 175 V2.1 Customized” outsourced as it…
P
Printables
Toolchanger NonPlanar Air Duct
Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles
P
Printables
Open5x for Toolchanger
Work in progress... https://github.com/FreddieHong19/Open5x Use 6201 Ball Bearing
P
Printables
Duet 3 6HC, Tool Distribution Board, and Rpi Mounts for E3D ToolChanger
Board mount for Duet 3 6HC and Tool Distribution Board Mounts for E3D ToolChanger. Uses M3 heat set inserts for mounting electronics to the adapter and the adapter to the ToolChanger.
P
Printables
E3D ToolChanger Hemera Fan Shroud Tilted (Fail)
Update: sadly it doesn't seem to work properly, since my fan sometimes still needs a little push to start spinning. =( This is an ugly remix with the fan 10° tilted and further away from the back of the motor to allow it to spin; being…
P
Printables
ToolChanger - Adjustable Cleaning Brush
I changed the design, to place an other brush inside and also replaced the metal wire to a silicon strip to remove any extrudate from the nozzle before brushing. The silicon strip is 19x13x2mm and here is the brush i use:…
P
Printables
E3D ToolChanger - Toolhead LED Illumination
I made a little holder to put a LED strip underneath the toolhead, so i got the light where i need it. It is a simple and easy printable part, which clicks onto the the spacers. The cable can be laid as the cable from the endstop. You…
P
Printables
E3D ToolChanger Hemera Fan Shroud
I made a new fan shroud for the E3D Hemera, which i use in my ToolChanger. I printed it with the Prusa SL1, but FFF will also work. Update V5.1: Added additional 0.5mm to the mounting points. Feel free to remix and improve it.
P
Printables
E3D Toolchanger (any) webcam mount
Print with supports!!!! (where there are 90° overhangs) Mounts with the original model this was remixed from
P
Printables
E3D ToolChanger Hemera part cooling fan duct
E3D Hemera fan duct to use a airpump instead of a fan. I use a piece of 6mm aluminum tube to connect the hose to. Ive also uploaded another version which uses two 3mm tubes instead of a printed duct, which gives you the option to find the…
P
Printables
Revo Hemera XS Tool - E3D Toolchanger
MODEL DETAILS These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform. A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use…
P
Printables
Motion System - E3D Toolchanger
Please refer to our Motion System Github for more information.
P
Printables
V6 Hemera Tool - E3D Toolchanger
Please refer to our Toolchanger Github for more information.
P
Printables
V6 Bowden Tool - E3D Toolchanger
Please refer to our Toolchanger Github for more information.
P
Printables
Hemera Revo XS Part Cooling Fan Tilted Duct for E3D Toolchanger
The E3D Toolchanger tools are a challenging design due to the size, weight, and location constraints of the tool. For Hemera direct drive hotends, there is very little space for the part cooling fan, and most designs require the…
P
Printables
E3D Toolchanger Hemera raised blower
This exists due to the EMI coming from the Hemera stepper motor interfering with the blower fan and not allowing it to spin. The idea to raise the blower fan comes from @shivdeepak_370671 ( https://www.printables.com/model/445024 ),…
P
Printables
E3D'S TOOLCHANGER - TOOL HEAD COVER REMIX for REVO HEMERA XS tools
You just print a new cover, a new cover for the tool head with a place for the switch, and then use the spare original E3D wiring. On each tool, the dock part is replaced, included are both normal and mirror tool parts. In rep rap…
P
Printables
E3D ToolChanger Cable Clips
A quick design to organize the bowdentubes, strain reliefs and cables on my self-made E3D ToolChanger. I now made a version for the original ToolChanger, but since i sourced the parts by my own, i couldnt test it with the strain reliefs…
P
Printables
E3D ToolChanger Hemera Mount with Captive Nuts
These 3 stock E3D ToolChanger Hemera mount components require threading screws directly into the plastic, which I'm not a fan of. I have modified these components to instead use captive M3 nuts which will provide a stronger hold and…
P
Printables
Remix Titan Amor Mount for E3D Toolchanger
This is a remix of https://www.thingiverse.com/thing:3856096/ because it has 2 flaws 1) The Tension knob hole is too small 2) the distance from backplate for tension knob is too small swell so i extended it now i am happy feedback welcome…
P
Printables
E3D Toolchanger IR DC42 Holder
I broke the mechanical switch so i had to act ,.. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 80% Filament: Yes PLA, CPE, PETG Maximum importance !!! Category:…
P
Printables
E3D Toolchanger Bigbox OOzebox holder
I was not happy with ooze solutions , i now have an E3D Toolchanger with V6, Mosquito , Aero Volcano and Hermes so different heights and so on. But reality is in multicolor it will ooze at the printer and spools so i decided to use the…
P
Printables
E3D Toolchanger Wiper Bucket
I have Standard wiper and building Gregs Adjustable Brush but because of having Brass nozzles as well i dint like the Steel brush stuff so i do it with Kitchen made silicon for wiping. But the oze bucket might be of use for others as well…
P
Printables
E3D's ToolChanger - detachable spool holder roller bearings
The friction was too much for that part so i remixed different designs and adjusted them for the E3D Printer Beware of the length ! Category: 3D Printer Parts
P
Printables
E3D Toolchanger Mosquito mount V3
Beware WIP ! 2019.10.26 Newer Version V3 now Tested 2019.10.20 New Version This Version is the minimalistic Version to be compatible with V6 and Cooling But I keep the Old if someone is interested The Fan mount is the next iteration I…
P
Printables
E3D Toolchanger Digimicro mount
I want to have my USB Micro mount to the tool changer for Calibration Category: 3D Printer Accessories