1 / 5
Revo Hemera XS Tool - E3D Toolchanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All the printed parts needed to create the Revo Hemera XS Tool.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 1988
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (26)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (31)Powiązane
MODEL DETAILS
These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform.
A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use this configuration.
If upgrading from original V6 Hemera tools, please note:
- Z offsets have changed by around 11mm from the original V6 Hemera tool so be sure to account for this in your config.g to avoid crashing into the print bed.
- The X position of the Toolplate has moved by around 12.5mm to the right. You will need to account for this in your tfree.g and tpre.g files.
Note: the offset for the mirrored version will be different. - The Y position of the Toolplate remains the same.
RECOMMENDED PRINT SETTINGS
No supports are needed for any of these parts but bear in mind that the holes may need reaming/tapping.
Check out E3D!