1 / 5
Revo Hemera XS Tool - E3D Toolchanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All the printed parts needed to create the Revo Hemera XS Tool.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 230
- Makes
- 0
- Views
- 1,988
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
MODEL DETAILS
These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform.
A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use this configuration.
If upgrading from original V6 Hemera tools, please note:
- Z offsets have changed by around 11mm from the original V6 Hemera tool so be sure to account for this in your config.g to avoid crashing into the print bed.
- The X position of the Toolplate has moved by around 12.5mm to the right. You will need to account for this in your tfree.g and tpre.g files.
Note: the offset for the mirrored version will be different. - The Y position of the Toolplate remains the same.
RECOMMENDED PRINT SETTINGS
No supports are needed for any of these parts but bear in mind that the holes may need reaming/tapping.
Check out E3D!