Horizontal Dock System for MadMax Toolchanger (Ender 5 / Mercury One.1 Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, & more
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatible with all toolheads supported by MadMax:
DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick
Remixed for the Ender 5 / Mercury One.1, this horizontal dock system provides a clean, rigid front-facing tool change setup within the MadMax Toolchanger ecosystem. Designed to bolt directly to your front 2020 extrusion with standard M5 hardware.
🔧 Features:
• Front-facing tool loading for clean magnetic swaps
• Fits Mercury One.1 2020 front extrusion (44.5mm spacing)
• Includes both left and right dock bases and brush holders
🖨 Recommended Print Settings:
Material: ABS or PETG
Layer Height: 0.2mm
Supports: Not required
Infill: 40%
Perimeters: 3+
📦 Parts Needed:
4x M5x10 or M5x12 bolts per dock
4x M5 T-nuts per dock
4x 6×3 mm magnets for tool plate
🧪 Notes:
Tested on a DragonBrick toolhead with dual 4010 part cooling fans
Mounted on a Mercury One.1 Hydra frame with 275mm bed