E3D Toolchanger Omniadrop mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This has parts for the omniadrop V2.1 to fit the E3D toolchanger. All parts should at least be printed in PETG
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This includes all printed parts that are needed for the Omniadrop V2.1 HEMERA (thin) to fit the E3D toolchanger.
I RECOMMEND USING STRONG MATERIALS (PCTG, ABS, PETG, PC).
I had the “Omniadrop Hemera 175 V2.1 Customized” outsourced as it is very difficult to print in the correct resolution (below 0.2mm layer height).
All other parts can be printed without too many issues (high resolution recommended).
If you have a E3D toolchanger, extra screws that have been shipped (M2, M3) should be all that you need. For extra refrence look at the source file.
Threaded inserts are needed for the “OmniadropNewDuct” in M2.5 variant (holes may be small however it should work). Support TC Plate
Please let me know if you need assistance with assembly.