E3D Toolchanger Pitlane with captive nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple remix to add a pair of captive M3 nuts to avoid having to rely on tapping into the plastic part.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Throughout the build of the E3D Toolchanger I noticed a significant number of parts that rely on tapping into plastic printed parts, in my experience this is a great method when using M5 and above sized threads, but is not very reliable when dealing with M3 and below as they strip easily. To avoid this I like to use the captive nut technique, in this case you will need a pair of M3 nuts (nyloc if you are feeling super fruity).
I was on a bit of a roll with adding captive nuts to various Toolchanger components so I thought I would do this one while I am at it.
Printed in Prusament Orange PETG on my Prusa MINI.