Counting matching models…
Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…
Typical 3D printed gadgets are laden with hyper specific parts that increases the BOM cost significantly. I tried to find a completely mechanical toolchanger and only found over-engineered designs with large BOM's and complex assembly. I…
This model includes the carriage of the Mad Max toolchanger, with 3mm holes instead of 1/8". This makes it easier to source parts. This is a drop-in replacement, so if you decide to use it, you only need to reprint this part. The…
After a year and a half the SV08 toolchanger mod has been released. In collaboration with DraftShift design, their Stealthchanger mod for the Voron 2 ( https://github.com/DraftShift/StealthChanger ) has been adapted to the SV08. Due to…
Posted only the back mount, the rest is the same as the original. All credit goes to the original designer, I just needed to move the mount to the side so it would fit next to the Stealthmax. Printed in standard Voron settings, follow the…
Full Description This is a multi-part, multi-color wall art piece of Mario designed to be printed as individual color pieces and assembled like a children's puzzle. No AMS or multi-material system is needed. Just print each part in your…
Description Custom back panel for use with LDO Stealthchanger Tophat Kit: https://ldomotion.com/products/stealth-changer Also applicable to custom 200mm tall tophats made of 2020 extrusions. Designed for 8 tool setups and active…
Total weight of tool: 215g (measured by un-docking tool and placing it on a scale). No PCF mounting as I use side panel mounted fans. This setup is capable of printing 90A TPU without issues (I have not tried anything softer than this)…
A narrow Orbiter based extruder for the Jubilee Printer using an E3D toolplate. Print using whatever material you like though I use PETG. All parts are oriented as they should be printed. I needed a brim around the cooling nozzle to keep…
This is an Modded Skirt is for an Voron Draftshift/Toolchanger, with an Extended Y frame of 100mm. And Front 2040 Extrusions. The Front Motors Are Extendet For 2040 Extrusions. Frame Must be Extendet in Y about 100mm Front Motors needs to…
Extended Z-Covers For 2040 Extrusions for the Voron Draftshift/Toolchanger Design. Used Screws : M3x8 (10 Pieces) This are Extended Z-Covers for the front of the Draftshift/Toolchanger with 2040 Extrusions. If you only Print the Shorter…
Designed to replace the Standard ToolChanger Cover , this cover takes a Raspberry Pi Zero and Mini Camera and mounts it to the ToolHead. For extra features install OctoPrint on the Zero! I bought some lenses to try to see if it was…
Add automatic brush height adjustment to your Motion System & ToolChanger ! A motorised adjustable brush for the wiping and cleaning of nozzles during tool changes. If you would like dual adjustable brushes (why wouldn't you?) print a set…
I redesign & remix again to ditch Elegoo Toolboard and use BTT EBB42 Toolboard. Version 1 files can refer to this link: https://www.printables.com/model/936634-neptune4plus-quicktoolchanger-h2v2s-remix-v1 Step 1 Please print out:…
Adapt the Smart Orbiter 3 to the original Duet 2 Toolchanger (no Toolboard). See my separate model made for the version with Toolboard. Uses a 4010 Blower due to space constraints - there are threaded inserts to be put in the baseplate…
This is a tool for the Jubilee toolchanger featuring the E3D Revo Hemera XS extruder. I have a V6 Hemera direct drive extruder on my Jubilee printer, but I wanted to try to build a smaller, lighter and quiet Hemera based tool. This tool…
This is a Creality Laser Module mount for ProperPrinting's sprite toolchanger . I kept switching between laser cutting and 3d printing, and I was getting tired of screwing and unscrewing the extruder. Then I found this sprite toolchanger.…
Sollte in hochwertigen Materialen mindestens ABS. Hab ihn selber nur in PC CF getestet. Funktioniert wunder bar bei Temperaturen Ü 60° im Bauraum ist die Magnetkraft subotimal deshalb bau ich die nächste Version ohne Magneten für Pla Petg…
The standard part of the E3D toolchanger to route the cables to the tool includes an extension for a bowden tube. On my machine, I use orbiter extruders in a direct drive configuration and route the bowden tube up from behind the machine.…
Extruder for Jubilee Printer Using Orbiter 1.5 and Rapido hotend based on an E3D toolplate. Will need (8) short Dodge heatserts. (1) 46mm PTFE tube. (4) M3 x 8mm socket heads to mount Orbiter and wiring stanchion. (2) M3 X 8mm countersunk…
This spool holder is simple and effective. You can place several spools on a tool changer chassis with it, and it also includes PTFE holders. It was designed with a number of issues in mind: It's designed to be simple. Being able to be…
Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…
This mod allows you to mount the CEB pcb to the back of your printer and hide your CanBus cable management neatly in a pretty box. It goes nicely with another model I've made that allows you to route the cables via the back filter: Voron…
This simple mod helps you to make your toolchanger cables to point up. This helps them to move freely without entangling with each other. Each section have 3 holes: 4mm for PTFE tube 1.2mm for the metal wire, if you have one 6mm for the…
Chci tento projekt prezentovat jako myšlenku, že stavba toolchangeru je lehká. Můžete se inspirovat mojí nástavbou výměny hlav ze souborů v tomto projektu. Část I. - Hardware Jelikož jsem chtěl postavit co nejjednodušší verzi, rozhodl…
Throughout the build of the E3D Toolchanger I noticed a significant number of parts that rely on tapping into plastic printed parts, in my experience this is a great method when using M5 and above sized threads, but is not very reliable…
Anthead Crossbar Docks for Madmax Toolchanger These toolhead docks are designed for the Madmax Toolchanger system and are compatible with Voron Trident and similar static gantry printers. The docks mount to a 2020 extrusion oriented in…
This is a quick Remix of Greg_The_Maker's version, my TC had extrusions without the little step and Greg's mounts didn't fit correctly. These have a 7.8mm wide step that sits perfectly in the extrusions on my toolchanger. Second picture…
Stealthchanger / Toolchanger Voron Design Calibration Cube This is multi parts so you can color them easily.
Stealthchanger / Toolchanger test Chip. This is multi parts so you can color them easily. Available in .stl, .obj and .3mf files.
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Keep your nozzles clean and your tool changes smooth with this dedicated nozzle brush holder,…
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Remixed for the Ender 5 / Mercury One.1, this horizontal dock system provides a clean, rigid…
Typical 3D printed gadgets are laden with hyper specific parts that increases the BOM cost significantly. I tried to find a completely mechanical toolchanger and only found over-engineered designs with large BOM's and complex assembly. I…
a model for first layer check on toolchangers (Prusa XL, Snapmaker U1)
A simple solution after experiencing a few false triggers during sensorless homing on the X axis. You will need to replace the M3x16mm bolts for M3x25mm
Pitlane bracket to hold the tools for maintenance
Remixed Otann's Original model . --update-- Original Author updated model to support 5 tools. so if you have 5 tools, why dont you download original author's new model instead?
Dockadapter for e3d toolchanger modified to use with runout sensor, see my other files for runout sensor
OTC – Orbital ToolChanger is an experimental 3D printer design featuring a single rotating toolhead with four independent hotends. This system allows multi-material printing without the need for nozzle purging, reducing filament waste and…
All you will need for this are 10 M3 voron standard (M3xD4.6xL4) heat inserts and 10 M3x6-8 screws. I would use button top. ** If you want to use just 4 of each (1 for each corner) instead of using all the holes for inserts and screws,…
This model includes the carriage of the Mad Max toolchanger, with 3mm holes instead of 1/8". This makes it easier to source parts. This is a drop-in replacement, so if you decide to use it, you only need to reprint this part. The…
Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right) I wanted to use the standard Dragonburner toolhead on my attempt at a MadMax toolchanger, so I remixed Chirpy's V8 of the Dragonburner toolhead to include the holes for…
The Stealthchanger Dock is a bit too complex for my needs and involves an excessive number of parts. I am looking for a simpler, more minimalist, yet reliable docking solution for my A4T ToolHeads. This is still very much a work in…
These G-code files are service and endurance tests for the Prusa XL toolchanger . They are designed to repeatedly cycle through all toolheads to stress-test the docking system , tool coupling mechanism, and repeatability under controlled…
The Stealthchanger Dock is a bit too complex for my needs and involves an excessive number of parts. I am looking for a simpler, more minimalist, yet reliable docking solution for my XOL ToolHeads. This is still very much a work in…
After a year and a half the SV08 toolchanger mod has been released. In collaboration with DraftShift design, their Stealthchanger mod for the Voron 2 ( https://github.com/DraftShift/StealthChanger ) has been adapted to the SV08. Due to…
Posted only the back mount, the rest is the same as the original. All credit goes to the original designer, I just needed to move the mount to the side so it would fit next to the Stealthmax. Printed in standard Voron settings, follow the…
Full Description This is a multi-part, multi-color wall art piece of Mario designed to be printed as individual color pieces and assembled like a children's puzzle. No AMS or multi-material system is needed. Just print each part in your…
Description Custom back panel for use with LDO Stealthchanger Tophat Kit: https://ldomotion.com/products/stealth-changer Also applicable to custom 200mm tall tophats made of 2020 extrusions. Designed for 8 tool setups and active…
Introducing the first tool changer for the Prusa i3 Mk3s+. This model is to be used with the BIQU Hermit Crab. So far there has never been a way to quickly change extruders or other addons on and off your printer. This model will make…
This is my version of a mount for Joe Pomo's excellent Orbiter Extruder. https://www.thingiverse.com/thing:4223085 It is an ADD (Almost Direct Drive) block for mounting the orbiter above the E3D Toolchanger alignment block. It uses the…
My setup that this was designed for: Ender 5 Plus ( 2020 V-Slot Aluminum Extrusions) with the following major modifications: Zero-G Mercury One.1 Core-XY Motion System Upgrade Project is located on Github Front Mounted MGN12 Rail on…
The craziest project of this year. PrusaWIRE XL StealthChanger and Prusa XL VINDX Hotend Toolchanger PrusaWIRE XL StealthChanger is currently under active development. Throughout the design process, numerous concepts and engineering…
A simple rainbow to test a toolchanger or other multicolor system. Import the 3mf into your slicer and set whatever colors you want for the different segments
I installed Hemeras in my Toolchanger and found that the Tool2 hot end fan and the Tool3 part cooling fan were too close together. Shifted the Tool3 Dock to the right 7mm to give them more airflow when docked. Note: You, of course, need…
Note: This project is currently in Beta. Community testing and feedback are greatly needed. The build guide and BOM have been posted! please visit https://github.com/emna2881/E3NG-Toolchanger . Hotend-Swapping Mechanism: Swaps hotends…
A simple remix of the TC-V6-DOCK-BRACKET-HEMERA-With-Nuts.stl part that makes room for attaching a Duet 3 tool board. Print the rest of the parts from https://www.thingiverse.com/thing:4786232 , and I'd recommend printing the part cooling…
A simple remix that adjusts the PCF ducts to accommodate the SOD123 diode that's present on the v1.1 version of the tool boards. Print all of the other parts from the original version: https://www.thingiverse.com/thing:4194982 Category:…
Can be used to mount a Duet Magnetic Filament Monitor to an E3D Hemera ToolChanger tool head. The mount is "shimmed" at the top, above the "V6_Receiver_Top" part from the toolhead. You will need to switch to 4x 18mm M3 screws to make room…
A simple adapter that enables you to use E3D's Hemera ToolChanger tool on a Jubilee 3D printer. Uses the metal tool plate and dock, and raises them up to the appropriate height. There's also a piece sticking out for a Duet 3 ToolBoard…
This Thing includes the following parts: Two of the parts (Hemera Dock Bracket and Hemera PCF Duct) from https://www.thingiverse.com/thing:4008778 modified to accommodate a Duet 3 Tool Board on the Hemera tool. My thanks to Greg Holloway…
Sharing my model to mount Orbiter V2.0 direct extruder to work on the E3D Toolchanger. Works with the v6 tool plate. The file is printed in Petg, It hold up very nicely. The base is made to accomodate M3 inserts to mount the extruder.…
2 different versions of the mount, unmirrored and mirrored. To save as much space as possible I moved the filament lever underneath the receiver, though it doesn't look like it, the filament lever is still quite easily accessible and if…
E3D ToolChanger adapter for BondTech LGX ACE Copperhead/Mosquito Printhead. I really dislike the way the E3D Hemera tool is designed. Assembly: (assembly video instructions coming soon) you need to print: 1x tc receiver 1x toolplate…
I made this design because I wanted my 7 inch screen in the middle of my E3D Tool Changer, (most of) current designs are asymmetric. I wanted my screen to be mounted symmetric. With the two feet mounted, you can slide the case onto the…
The tube end cap(s) can be used for the spool holders of the E3D Toolchanger. In assembly step 7 - Fitting the spool holders , replace the round bars ø8x90mm with steel or aluminium tubes ø8x1mm - 90mm long. Press the tubes into the…
See it in action: Cheap 3D Printed Toolchanger Updates will be most regularly published at GrabCad | Compact CoreXY Toolchanger This is rebuild of the Solidoodle 3 with CoreXY Kinematics and a toolchanger based loosely on the E3D…
This includes all printed parts that are needed for the Omniadrop V2.1 HEMERA (thin) to fit the E3D toolchanger. I RECOMMEND USING STRONG MATERIALS (PCTG, ABS, PETG, PC). I had the “Omniadrop Hemera 175 V2.1 Customized” outsourced as it…
Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles
Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles
Work in progress... https://github.com/FreddieHong19/Open5x Use 6201 Ball Bearing
Board mount for Duet 3 6HC and Tool Distribution Board Mounts for E3D ToolChanger. Uses M3 heat set inserts for mounting electronics to the adapter and the adapter to the ToolChanger.
Update: sadly it doesn't seem to work properly, since my fan sometimes still needs a little push to start spinning. =( This is an ugly remix with the fan 10° tilted and further away from the back of the motor to allow it to spin; being…
I changed the design, to place an other brush inside and also replaced the metal wire to a silicon strip to remove any extrudate from the nozzle before brushing. The silicon strip is 19x13x2mm and here is the brush i use:…
I made a little holder to put a LED strip underneath the toolhead, so i got the light where i need it. It is a simple and easy printable part, which clicks onto the the spacers. The cable can be laid as the cable from the endstop. You…
I made a model to add to Simplify3D which visualize the printbed and the bracket from the E3D Tool Changer. It has no function, but looks nice. If you want to add the model, just got to Tools -> Options -> Machine -> Printer Models and…
I made a really simple mount for the original Raspberry Pi Zero case. I cut a bigger hole into original cover to fit the wide angle camera and used some glue to fix it in there. Into the backside of the case i drilled two holes for M3…
I made a new fan shroud for the E3D Hemera, which i use in my ToolChanger. I printed it with the Prusa SL1, but FFF will also work. Update V5.1: Added additional 0.5mm to the mounting points. Feel free to remix and improve it.
Print with supports!!!! (where there are 90° overhangs) Mounts with the original model this was remixed from
E3D Hemera fan duct to use a airpump instead of a fan. I use a piece of 6mm aluminum tube to connect the hose to. Ive also uploaded another version which uses two 3mm tubes instead of a printed duct, which gives you the option to find the…
MODEL DETAILS These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform. A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use…
Please refer to our Motion System Github for more information.
Please refer to our Toolchanger Github for more information.
Please refer to our Toolchanger Github for more information.
The E3D Toolchanger tools are a challenging design due to the size, weight, and location constraints of the tool. For Hemera direct drive hotends, there is very little space for the part cooling fan, and most designs require the…
This exists due to the EMI coming from the Hemera stepper motor interfering with the blower fan and not allowing it to spin. The idea to raise the blower fan comes from @shivdeepak_370671 ( https://www.printables.com/model/445024 ),…
You just print a new cover, a new cover for the tool head with a place for the switch, and then use the spare original E3D wiring. On each tool, the dock part is replaced, included are both normal and mirror tool parts. In rep rap…
A quick design to organize the bowdentubes, strain reliefs and cables on my self-made E3D ToolChanger. I now made a version for the original ToolChanger, but since i sourced the parts by my own, i couldnt test it with the strain reliefs…
These 3 stock E3D ToolChanger Hemera mount components require threading screws directly into the plastic, which I'm not a fan of. I have modified these components to instead use captive M3 nuts which will provide a stronger hold and…
This is a remix of https://www.thingiverse.com/thing:3856096/ because it has 2 flaws 1) The Tension knob hole is too small 2) the distance from backplate for tension knob is too small swell so i extended it now i am happy feedback welcome…
I broke the mechanical switch so i had to act ,.. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 80% Filament: Yes PLA, CPE, PETG Maximum importance !!! Category:…
I was not happy with ooze solutions , i now have an E3D Toolchanger with V6, Mosquito , Aero Volcano and Hermes so different heights and so on. But reality is in multicolor it will ooze at the printer and spools so i decided to use the…
I have Standard wiper and building Gregs Adjustable Brush but because of having Brass nozzles as well i dint like the Steel brush stuff so i do it with Kitchen made silicon for wiping. But the oze bucket might be of use for others as well…
The friction was too much for that part so i remixed different designs and adjusted them for the E3D Printer Beware of the length ! Category: 3D Printer Parts
Beware WIP ! 2019.10.26 Newer Version V3 now Tested 2019.10.20 New Version This Version is the minimalistic Version to be compatible with V6 and Cooling But I keep the Old if someone is interested The Fan mount is the next iteration I…
I want to have my USB Micro mount to the tool changer for Calibration Category: 3D Printer Accessories
