E3D Revo Roto ToolChanger Blower Fan Duct and Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Part cooling fan duct and mount for the E3D ToolChanger and Roto Extruder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
About
This is a part cooling fan duct and mount for the E3D ToolChanger and Roto extruder. It is designed around the WinSinn 4010 blower fan and supports the attachment of the Duet Roto Toolboard.
Printed Parts List
- PCF Duct
- Toolboard Adapter
- Fan Bracket (optional)
- Plate Adapter
- Plate Adapter with Switch Lever (optional)
- Dock Brace
- Washer x 2 (optional, on top of tool board)
- roto-duet-toolboard-tc-cable-support (for use with Duet Roto Toolboard)
Additional Hardware
| 4x 8mm M2 | Part fan retaining screws |
| 4x 12mm M4 | Pan head self-taping screws (comes with Roto kit) to secure motor |
| 2x 8mm M3 | Fan duct to plate adapter |
| 1x 8mm M3 | Fan bracket to tool plate adapter |
| 2x 12mm M3 | Plate adapter to Dock Brace |
| 2x 10mm M3 | Dock Brace to tool changer receiver
|
| 6x 8mm M3 | Countersunk screws for tool plate mounting |
| 2x 6mm M3 | Tool board adapter to tool-changer receiver |
| 2x 6mm M3 | roto-duet-toolboard-tc-cable-support to tool changer receiver. |
Unless otherwise noted, these are all assumed to be socket head cap screws.
Print Settings
0.4 nozzle.
0.2 layer height.
3 perimeters.
4 top layers, 3 bottom layers.
15% infill.
Shouldn’t need support structures, but a couple of places on the PCF Duct may print better with them.
I printed it with PC-CF filament for added stiffness and heat resistance.
Additional Notes
The ‘Plate Adapter with Switch Lever’ part is intended as an optional alternative to the ‘Plate Adapter’ and includes an extension which can be used to trigger a switch located on the tool head when the tool is picked up.
The ‘Fan Bracket’ part provides some extra rigidity and support for the fan but it’s use isn’t absolutely necessary.
Attributions
The fan duct was inspired by Rene Jurack’s Well-Engineered Hemera fan duct, which can be found here:
https://rene-jurack.de/well-engineered-hemera-fan-duct-2
The ‘roto-duet-toolboard-tc-cable-support’ part comes from the E3D Revo Roto Toolchanger Mount, which can be found here:
https://www.printables.com/model/802772-e3d-revo-roto-toolchanger-mount