Counting matching models…
This is a mount for a 3010 fan meant to connect to, and cool, BTT EBB36 toolboards with some metal standoffs. This was designed for use with the Calamity Toolhead and this EBB36 mount . Hardware Metal standoffs, 25mm+ (depends on how…
If you find your toolhead board getting a bit too hot while printing simply add a 3010 24v fan! Edit: Fixed top so fully flat for better printing! Edit: Added vented version. Edit: Added the fan mount here too for ease. Edit: Totally…
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
I wasn't a fan of the available PCB mounts and strain relief options for the O2S Toolboard and Orbiter so I made this when putting together my custom sidepack crucible printer. Simple and works well. I've provided the original solidworks…
Provides support for O2S Toolboard
I added 15mm of horizontal clearance so as to allow a toolboard at the toolhead.
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
The standoff for the Vertical Toolboard for the Ratrig V-Core 4 doen't fit if you use the Orbiter 2.0 filament sensor. I've remixed it. Press fit in the standoff and you will not need to cut or modify the standoff. If you want added…
please see the original model for instructions. This model uses many heatset inserts. Feel free to modify the design as needed (the .step file is attached). Keep in mind this is for the V1.1 revision of the 1LC board, if you have a…
Remix of the original EBB42 vertical toolboard mount for LDO Orbitool O2 toolboard. It will fit both V-Core4 and V-Core3 toolhead. Instead of a pianowire there is a hole for a piece of nylon filament. The step file is included so it is…
Adapt the Smart Orbiter 3 to the original Duet 2 Toolchanger (no Toolboard). See my separate model made for the version with Toolboard. Uses a 4010 Blower due to space constraints - there are threaded inserts to be put in the baseplate…
This is a mount for a 3010 fan meant to connect to, and cool, BTT EBB36 toolboards with some metal standoffs. This was designed for use with the Calamity Toolhead and this EBB36 mount . Hardware Metal standoffs, 25mm+ (depends on how…
N4Plus-VoronSB-H2V2X-Mount-Remix v1 Hardware needed: 1) Cap Screw M3x6 - 4pcs (for MGN12H Linear Rail Block) 2) Heat Threaded Insert M3x5x4 - 4pcs (for Voron Toolhead) 3) Timing Belt GT2 LL-2GT width 6mm Print Setting Perimeter: 3…
Подробности по данному проекту будут в видео, когда оно выйдет. More details on this project will be in the video when it comes out.
Given the fact that I could not find this hook to buy or on 3d printing platforms, I decided to design it myself. I recommend printing in the orientation shown in the pictures. Can be printed with any filament, requires only 3 grams. If…
the horisontal toolboard mount is made to fit the high temp cable from 3DO 3DO High Temp USB A-C Cable for 3D Printing - FEP+Silicone ---------------------------------------------------------------------------------------------------- on…
This is a Bitblock holder for PAFEN / Kistenberg / Botle / Valle Verde Toolboards (Wallboards) which can be equiped with 4 of my own Bitblocks or PBSwissTools Bitblocks As an option i designed my own easy to print bitblock with no support…
I designed a toolboard mount for my Voron 0 to address some limitations I found in the Universal Mount for the NH36 toolboard when using the Sherpa Micro extruder. Some advantages compared to the universal mount: Does not interfere with…
This is a mount I designed for the Vz_Hextrudort-Low extruder and the Duet RotoToolboard. It's my second attempt as the prototype did not have enough strain relief for the big XT30_2+2 connector that the roto toolboard uses. This version…
Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…
SHT36 Max V3 Toolboard cover Stealthchanger Toolhead cover Modified from an EBB36 design, specifically for the MELLO Fly SHT36 Max V3 board on my Umbilical toolboard mount - pictured - for WWG2 Extruders
Holds different numbers of bits securely and removably to the toolboard. Printing PLA/PETG .2mm any infill no brim, no supports print face down (or vertically with a brim)
I was looking for a way to add good strain relief and change to an umbilical for my Voron 2.4. I modified the stealthburner mount to flatten the side and created a spacer that gets sandwiched between the Roto toolboard and the mount. The…
These are two components from the Goat Toolhead system developed by Hjort Creations: Belt Clamp – Provides excellent grip and alignment for high-speed CoreXY motion systems. Toolboard Mount – EBB42. Clean, secure mounting with a…
I had a hard time with the default toolboard mount for the dragon burner. The printed spacers would break with time, become loose or deform when inserting the heatset inserts. The model this remix is based on, solved most of my issues…
Needed a decent toolboard mount for testing out protoxtruder 2.0.
Printing Settings : Layer Height: 0.2mm Nozzle: 0.4mm Perimeters: 3 Top/Bottom Layer: 3-4 Infill: 30% Support: Maybe needed Material: PETG/ABS/ASA Assembly for the MantisDuct-Remix v1 : 1) 5015 24v Blower - 2pcs 2) 3010 24v Fan - 1pcs 3)…
G2 Galileo 2 SB2209 USB tool board fan 30mm with heat set inserts.
Hello! Here is my version of a toolboard mount for the Orbitool O2S on the stock RatRig VCore 4 toolhead. Since the endstop is in the way of the lower mounting standoff, I did not use it, only the top hole of the toolboard has a more…
If you find your toolhead board getting a bit too hot while printing simply add a 3010 24v fan! Edit: Fixed top so fully flat for better printing! Edit: Added vented version. Edit: Added the fan mount here too for ease. Edit: Totally…
If you find your toolhead board getting a bit too hot while printing simply add a fan! BOM 3010 24v fan 4x M2.5 heat inserts 4x M2.5 12mm bolts 2x M3 20mm Countersink bolts If you want to reprint the entire cover to fit a fan use this…
Simple wall mount for tool and display boards. Back mount for double sided tape and a screw knob to fix to the front. Usable with 3-5 mm plywood boards. Can be printed as is with 0.1 layer height, but the knob should be scaled to 99% if…
Shrink tube that fits the MOSFET moduleIf you print the whole extruder cover, it made more sense to me to put the fan directly into the cover. Like in 3DPrintDemon’s mod, you need to install insert nuts for the fan — I used small M3 nuts,…
This is a direct replacement for the stock front cover of the Sovol Zero and Sovol SV08 Max toolheads. Besides improving part cooling performance, it also adds support for a dedicated toolboard fan (2510 size). We tested the part cooling…
The led lights were bothering me a bit and I also wanted a solution to add a fan if needed later, This is a toolboard cover for the H36 board from Fystech that works with my front mounted board for the Biqu Nebula mount on the Sovol SV08.…
I designed this mount to attach a Duet Toolboard 1LC V1.3 to the Voron Stealthburner. I found that the board doesn't fit very well on Voron so, after several iterations, I came up with this design to locate the board in the sweet spot to…
O2S Toolboard Mount to LGX Lite Pro, modified to accept Shammy 4 pin fan splitter. Mainly for my Takeoff Toolhead.
Removed fan grills for better layer adhesion as original model kept breaking with ABS. Added StealthChanger Logo. I used 2 M3x25 screws but all 4 holes are available to be used for various mounting.
A toolboard mount for the Galileo 2 Extruder using the original SV08 tool board. Photo is just of the prototype. Will upload photo of the final version once printed. Uploaded STL is the final version
This is a low-profile SHT36v3 board mount designed for Voron Trident printers. It may also fit the EBB36 board (not yet tested — if you’ve tried it, please leave feedback!). Changes from the original version: Mount lowered by 5 mm and…
Adapted the original one from Cristian I: Adaption of the original one from Cristian I: https://www.printables.com/model/1388826-orbitool-o2s-toolboard-mount-for-the-ratrig-vc4-to Kudos to Christian!
This is a set of 4 x Screwdriver-Holder, 4 x Plier-Holder, 9 x L-shaped Allenkey / Hexkey / Torxkey Holder for PAFEN / Kistenberg (old version only) / Botle / Valle Verde Toolboards (Toolwalls / Wallboards) The Holders can be combined and…
Küpper Lochwand, Toolwall is a standard for organizing your tools within your makerspace. Using this basic set of holders that fit perfectly into your Küpper Lochwand allows you to organize all your tools and small parts, as shown in my…
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
I wasn't a fan of the available PCB mounts and strain relief options for the O2S Toolboard and Orbiter so I made this when putting together my custom sidepack crucible printer. Simple and works well. I've provided the original solidworks…
LDO Nitehawk-36 (NH36) Toolboard Orbiter v2 A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. Including bottom mounting slot for Xol-carriage.…
LDO Nitehawk-36 (NH36) Toolboard WW-BMG for A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an WW-BMG extruder. Including bottom mounting slot for Xol-carriage.…
Provides support for O2S Toolboard
I added 15mm of horizontal clearance so as to allow a toolboard at the toolhead.
Extended CPAP UFO pipe with 15mm to have room for the EBB42 Toolboard.
For use in high-temperature printing chambers or higher extruder motor currents on Orbitool O2S. The fan power can be split from the hotend cooling fan port, cimp each pair of wires into one crimping sleeve. Following parts required: 1x…
Note: Specifically for use with Vitalii3D's "XOL/A4T Mount" I am in no way affiliated with him, I just used his mount What it is: When assembling my A4T I did not like any of the toolboard mounts I found available. They all mounted them…
These are additions I made to my Railcore II printer. Included is a cable management system, a Hemera toolboard.BLTouch mount and Duet Filamant Monitor mount. These are made to mount to the Mandela Rose Works Hemera Mount and Idlers. I…
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer.
I have modified Nadir's V5 Toolhead (Many Thanks!) to work with the Gen 2 EBB36 Board. There is a new mounting piece and a modified shroud. I have also modified the main extruder body so the shroud fits a bit better on the left hand side.…
Print with any filament, 0.4mm nozzle, 10%+ infill. Use 3x20mm M3 screws to mount the cover onto your own board support mount.
This is a mount used to attach Duet 3D 1LC toolboard to the EVA 3D carriage platform for MGN based 3D printers using the LGX extruder option. Mounts in place of the cable relief arm while retaining its functionality. Design draws…
This is the mount I am currently using on my V-Core 3 with EVA3 carriage. I trimmed 3mm off the stand-offs; you may need shorter heat-set inserts.
This is a holder for a BTT EBB42 or any other 42mm Toolboard, that secures on the side of the LGX Lite
Replaces EVA 3.0 Cable Guide with a Fly SHT 42 / EBB 42 mount that also contains a minimalistic cable guide. It can be attached to the EVA 3.0 using the 3 screws same as the original Cable Guide, and for added support (or as an…
MODEL DETAILS A mounting cover for the Duet 3 Toolboard v1.3 1LC , designed for use with the Hemera XS . We've provided a STEP file in case you need to make modifications to accommodate your own mounting/cooling solutions. 3x M3x8m screws…
Duet Toolboard and cable chain mount for EVA 3. Recommend to print with 3-4mm layer height and 40%+ infill for additional stability. Works well with orbiter extruders. Longer neck version to help with possible clearance issues with 4028…
This is a mount used to attach Duet 3D 1LC toolboard to the EVA 3D carriage platform for MGN based 3D printers using the LGX extruder option. Mounts in place of the cable relief arm while retaining its functionality. The support arms fit…
I made a Duet 3D Toolboard 1LC holder to connect to the EVA3 system and add stability. I added an arm that screws directly into the Orbiter screw, just use a longer M3x30 screw to connect the orbiter to the board back. Apologies if this…
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
Mount aims to have more contact area with other parts of the tool head, predominantly the stepper motor. Fixtures: Heat inserts M3x4 shorts (additional) 4x M3 bolt; 2x from kit + 2x additional 2x M3 hex spacer (from the kit) PS. Bridges…
Mount aims to have more contact area with other parts of the tool head, predominantly the stepper motor. Now features a cable relief. Fixtures: Heat inserts M3x4 shorts (additional) 4x M3 bolt; 2x from kit + 2x additional 2x M3 hex spacer…
These are tool holders for a BauHaus tool board. I use them for different screwdrivers, Files and wrenches. You can use the backplate model to create your own. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
BigTreeTech EBB 42 toolboard mount for Bondtech LGX Lite extruder on a EVA 3.0 system but u can use it also on other toolheads than EVA 3.0. Everything is created for M3 socket head screws and hex nuts.
Here is my ROME setup (for more information on Helge Keck's ROME see https://github.com/HelgeKeck/rome ) for my VCORE3 500 printer. Some of these are remixed versions of Helge's designs and some are original. This is a fully tested setup…
small block to use when mounting the toolboard to the wall to avoid bending the board.
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
Vaig comprar el plafó d'eines de l'enllaç inferior, i he estat dissenyant els suports que necessito per tenir organitzades les eines que utilitzo sobint. He emprat Fusion360 per a fer els dissenys, un calipper i força temps. Els…
I hated all currently available designs for an ebb42 toolboard mount on EVA3 that uses CPAP cooling with an Orbiter 2.0. I didn't want to put a big piece of plastic on the back of the motor cause of cooling concerns. Having it off the…
Wanted a mount for a Duet 1LC Toolhead board that did not require the large models/STLs of the steathburner to be customized. The left standoff needs a heatset like the original cable chain mount and the PCB mount heatsets need to be…
Single 5015 fan inlet for EVA 3 with a slight angle for use with a toolboard. Heavily inspired by very similar model , but it was designed for a slightly different fan and didn't have source files. It's not necessary, but I recommend…
This is a remix of the original design . Lightweight holder for the EBB42 tool board mounted directly on the Bondtech LGX. The installation requires the following: 4 pcs - M3 Standoff Pillar screws (you will find this in the LGX package)…
An official upgrade for your Voron Stealthburner, enabling you to use the E3D Roto extruder, Duet3D Roto Toolboard (optional Duet3D Roto Filament monitor). Please note you will need to use the Roto bowden configuration as part of this…
This mod of the original Ratrig V-Core 4 vertical tool board mount allows mounting of the O2 tool board from LDO by Robert Lorincz. It retains the same mounting pattern on the VC4 toolhead but requires the 18mm standoff that comes with…
A simple mount to allow toolboards to have it's cables come out vertical instead of at an angle. Primarily made for mounting with the ProtoXtruder v1 & v2, but should fit other Nema 14 pancake stepper motor printheads with and open…
Mount to fit your LDO toolboard to the back of a Sherpa Mini Extruder. most people who bought the Voron 2.4 LDO R2 kit would have this board. one threaded heat insert required to hold board to mount and use longer m3 screws that would…
