Ratrig V-Core 4 O2 Toolboard Vertical Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mod to the Ratrig EBB 42 tool board mount to accomodate the Orbiter 2 tool board from LDO.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 0
- Views
- 577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod of the original Ratrig V-Core 4 vertical tool board mount allows mounting of the O2 tool board from LDO by Robert Lorincz. It retains the same mounting pattern on the VC4 toolhead but requires the 18mm standoff that comes with the O2 tool board to mount (if using the filament sensor). The motor also should be rotated back to the original position, opposite the Ratrig VC4 instructions, in order for the stepper motor cable to reach the connector on the tool board. Clearance is provided for the Orbiter filament sensor also. This model requires (2) M3x4x4.6 brass heatpress inserts, same as used on the Ratrig toolhead.