SOVOL SV08 MAX TOOLBOARD COOLING FAN with integrated fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compare to original, you can scew fan in to extruder cover without need use 3DPrintDemon's PCB mount.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 55
- Makes
- 0
- Views
- 852
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Shrink tube that fits the MOSFET moduleIf you print the whole extruder cover, it made more sense to me to put the fan directly into the cover. Like in 3DPrintDemon’s mod, you need to install insert nuts for the fan — I used small M3 nuts, not need 3DPrintDemon's PCB mount. Especially with my mod, where you can use the BLTouch header as a 4th fan controller, the fan is conveniently detachable. The fan can also be PWM-controlled if needed, using the BLTouch header. There is one extra I/O pin for a tachometer (not tested).
For the 4th fan controller, you just need:
Small MOSFET AOD4184 module
5P JST 1.25 mm connector
JST 1.25 mm crimping pins
Shrink tube that fits the MOSFET module