Counting matching models…
I did like the original design. But found it to be a bit difficult to print without warping, and I like just a smooth outer wall riser. So I removed all the outer designs. This allows you to print each part on its side, obviously youll…
This snaps on to the fan body in place of the filter cover, allowing the use of 4"/100mm vent hose to a suitable location such as a nearby window. Freecad design file included in case you have a different hose size.
Lengthened the original Sovol Step file to accomodate 3kg spools, and thickened it up quite a bit.
On top of the BOM you must generate from the monolith github for printed corners, 9mm, no protrusion parts you'll need some extra stuff. I currently don't have time for a comprehensive BOM but you'll need extra 16mm m5 BHCS, 8x 50mm m5…
I adapted the excellent Feet riser/extender made by @Max_206949 https://www.printables.com/model/1052416-sovol-sv08-feet-module to use Creality Shock Absorbing Silicone Pads:…
Print head for printer Sovol sv08Max. Also suitable for SV08. extruder - LDO orbiter2.5 1pcs Hotend - Triangelab CHC XL 1pcs din 912 m2,5*5mm 8psc for mounting hotend IDM Scanner mount 1pcs cartographer scanner or other 1pcs micro switch…
Sovol's stupid design draws room air into the heater, forcing the heated air to escape through the exhaust fan back into the room. What were they thinking??? This project requires making new holes in the rear cabinet panel. Otherwise it's…
After installing the OEM enclosure on my SV08 Max, I noticed that the back half of the top cover is empty and screwed in. I designed this quick rack using 1/2 inch PVC pipe I had at home, left over from another project. The two ends are…
Print with standard settings but my preference is that this is printed in ABS or ASA. with 50% infill. V2 is honestly better where it has a more stable and flat profile. if you prefer V1 then this is still an option. I would recommend…
COVER WITH FAN 3010 FIXING WITHOUT SCREWS, INSERT N.4 MAGNETS DIAMETER 4x3 ON THE COVER USE PETG O PA6
total weight is ~950g ASA or ABS recommended all parts can be printed on a smaller printer (320x320)
Tested with Beacon only! Followed official docs at https://docs.beacon3d.com/installation/ Includes align tool for precise alignment. You will have to cut stock head cover a bit, or print an alternative one. Default USB cable lays well…
Print with standard settings but my preference is that this is printed in ABS or ASA. with 50% infill. V2 is honestly better where it has a more stable and flat profile. if you prefer V1 then this is still an option. I would recommend…
The frame is divided into several segments to facilitate the interlocking assembly, on the right side in the center I inserted an oscillating system that follows the position of the filament tube…
