Sovol sv08max Beacon/Cartographer mount

Tested with Beacon only!

Followed official docs at https://docs.beacon3d.com/installation/

Includes align tool for precise alignment.

You will have to cut stock head cover a bit, or print an alternative one.

Default USB cable lays well along printer's CAN cable, I used a simple USB extender and it worked well for me. The other end is connected to external USB, but I already got a small USB hub PCB for internal install.

My config:

[beacon]
serial: /dev/serial/by-id/usb-Beacon_Beacon_RevH_<insert-yours>-if00
x_offset: -16.5        # use align tool to measure your exact distance
y_offset:   0.0        # on Y axis as well
mesh_main_direction: x
mesh_runs: 1
contact_max_hotend_temperature: 280
home_xy_position: 250, 250
home_z_hop: 5
home_z_hop_speed: 60
home_xy_move_speed: 600
home_method: proximity
home_method_when_homed: proximity  # after initial calibration use induction
home_autocalibrate: never #unhomed # contact will calibrate beacon on first home