Counting matching models…
Cartographer3D Mount for Qidi Plus 4 ⚠This was a fun proof of concept to get Cartographer working on the Plus 4, but Stew's Beacon mount will serve you much better, please use that instead.⚠ I am leaving this page up as a resource to the…
Target If you don't want to mess with the backside PTFE tube gasket, use this minimalistic lid raiser to route the Cartograpers3D USB cable to the external USB port. For all others who are looking for a lid raiser to stop the PTFE tube…
DISCLAIMER: YOU ARE GONNA NEED TO CUT A SMALL PIECE OF THE ORIGINAL SHROUD OTHERWISE THIS WON'T FIT OR USE ANOTHER SHROUD DESIGN [ 955271-sv08-toolhead-cover ] Give this a read before you start and follow it to calibrate the probe […
BOM: 1x - Cartographer Flat Pack 2x - M2 Nylon bolt ( 50pcs M2 M2.5 M3 M4 Black White Nylon Plastic Phillips Pan Head Cross Round Screw Bolt length 5mm-50mm - AliExpress 13 ) 4x - M3 Heat Inserts 4x - M3x8 26-30 AWG stranded silicone wire…
This innovative model introduces compatibility with a plastic brusher designed specifically for effective nozzle cleaning. Additionally, the model supports Cartographer 3D Please prefer to use ABS or ASA filaments. UPDATE 13/4/25 I…
You can't really use the cnc belt teeth, as the belt needs to be in front in an mgn9 setup. I use these in addition to the metal clamp provided with the cnc toolhead carriage.
this mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits kobra neo and similar printers. In printer.cfg these are the printer specific settings that need changed in addition to…
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Kobra neo and similar printers. In printer.cfg these are the printer specific settings that need changed in addition to…
If you wish to use the Cartographer3D with the original lid riser, there's no straightforward route for the USB cable to follow, meaning that not only do you have to drill or file a hole, but you need to make it large enough for the plug…
I added some mounting points for a Cartographer3D or Beacon bed scanning probe. The XY offset for the probe should be right about: X: 0mm Y: 23.17mm
This mount comes to you courtesy of Tinkers Paradigm as we embark on a BLV Cube/Trident build to be published on our Youtube Channel. This is a modification of the base design to allow mounting and use of a Cartographer3d Probe and…
For a troodon V1, Mounts on the mgn9 carriage spot, on the bottom. using a Cartographer3D low profile sensor. Im have a mosquito hotend so you may need to adjust. with nozzle touching the bed, it needs to be 3mm way from the bed . v1.1…
REQUIRES 2 M3 BRASS INSERTS TO MOUNT THE PROBE TODO: add description Offset according to Onshape measurements should be around 25mm in y-direction. (ignore wrong axes in picture) When measuring using Esoterical's probe offset tool it was…
If you wish to use the Cartographer3D with the original lid riser, there's no straightforward route for the USB cable to follow, meaning that not only do you have to drill or file a hole, but you need to make it large enough for the plug…
