Cartographer3D/Beacon3D offset mount for Kobra neo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Ko
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 1
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Kobra neo and similar printers.
In printer.cfg these are the printer specific settings that need changed in addition to anything required with cartographer/beacon
for Kobra neo offsets stay the same at
x_offset: 17.5
y_offset: 26
and under bed mesh these are the minimums. This is the main upgrade between my original mount and this one by allowing you to scan almost the entire bed.
mesh_min: 15, 10
mesh_max: 215, 215
if you are purchasing the cartographer3D I would recommend that you buy the flat pack as it comes as separate boards with no connections soldered as you have to relocate the main board into the extruder head via 4 wires
items needed
2x M3 heat insert m3x3x4.5 https://www.aliexpress.us/item/3256804349544912.html
2x flat M3x6mm screw like this https://www.aliexpress.us/item/3256804883804669.html