Cartographer3D/Beacon3D offset mount for Kobra neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Ko
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount uses the existing stock probe holder allowing vertical adjustment and minimal changes to the printer. fits Kobra neo and similar printers.
In printer.cfg these are the printer specific settings that need changed in addition to anything required with cartographer/beacon
for Kobra neo offsets stay the same at
x_offset: 17.5
y_offset: 26
and under bed mesh these are the minimums. This is the main upgrade between my original mount and this one by allowing you to scan almost the entire bed.
mesh_min: 15, 10
mesh_max: 215, 215
if you are purchasing the cartographer3D I would recommend that you buy the flat pack as it comes as separate boards with no connections soldered as you have to relocate the main board into the extruder head via 4 wires
items needed
2x M3 heat insert m3x3x4.5 https://www.aliexpress.us/item/3256804349544912.html
2x flat M3x6mm screw like this https://www.aliexpress.us/item/3256804883804669.html