Spool rack for SOVOL SV08Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A filament spool rack to be placed on top of SOVOL SV08 Max
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
After installing the OEM enclosure on my SV08 Max, I noticed that the back half of the top cover is empty and screwed in. I designed this quick rack using 1/2 inch PVC pipe I had at home, left over from another project.
The two ends are screwed onto the frame using M3X10mm (or M3X12mm) screws. An optional center support helps prevent the PVC tube from bending. I've also included an optional divider if you'd like.
A set of STEP files is also included if you want to modify this design to meet your needs.
You'll need four M3X10mm (or M3X12mm) screws.
***NOTE: Print and use at your own risk. I'm not responsible for any damage or warranty nullification caused by using this rack! ***
You can check out my other models at:
https://www.printables.com/@Toy_Maker_3184077/models
Your “likes” and “boosts” are appreciated.